دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trapتعیین طول بهینه موجگیر و تحلیل درب ضد انفجار فولادی در تونل دارای موجگیر231242207030FAصفاپیماناستادیار دانشکده مهندسی و پدافند غیرعامل، دانشگاه
جامع امام حسین علیه السلامهادیطولابیدانشگاه جامع امام حسین (ع)Journal Article20191121The purpose of this study is to investigate the effect of blast wave trap on reducing the detonation effect in tunnels and its effect on reducing the load on the explosion-proof door end of the tunnels and to analyze the types of doors in order to determine which type has the best performance against detonation. To this end, the propagation of the waves induced by the explosion of TNT-type beams with different weights is simulated in the tunnel span with a blast wave trap. The AUTODYN hydrocode is used for numerical simulations. The simulation and numerical modeling are compared and validated with analytical and empirical relationships of previous studies. Considering the maximum pressure applied to the tunnel intersection, the proper location of the blast wave trap, the optimal blast wave trap length and its effect on the maximum value of the tunnel end pressure are investigated. The output of the load applied to the end of the tunnel (location of the explosion-proof door) resulting from this time-dependent explosive load modeling is transferred to ABAQUS software to analyze and compare the types of explosion-proof doors. From the point of the load exerted on explosion-proof doors, hinged doors with different flat and arched geometries are analyzed using ABAQUS software and the maximum displacement and von-Mises stress of the doors are compared. The results show that the arch door performs better than the flat door.هدف از این پژوهش، بررسی اثر موجگیر در کاهش اثر انفجار در تونل و کاهش بار وارده به درب ضد انفجار انتهای تونل و تحلیل انواع درب برای تعیین عملکرد بهتر دربرابر انفجار است. برای نیل به این هدف، انتشار موج ناشی از انفجار خرجهایی از نوع TNT با وزن مختلف در دهانه تونل دارای موجگیر شبیهسازی شده است. برای شبیهسازی عددی از هیدروکد AUTODYN استفاده شده است. شبیهسازی و مدلسازی عددی با روابط تحلیلی و تجربی مطالعات پیشین مقایسه و اعتبارسنجی شد. با توجه به بیشینه فشار وارده به تقاطع تونل، مکان مناسب موجگیر، طول بهینه موجگیر و اثر آن در مقدار فشار حداکثر انتهای تونل بررسی شده است. خروجی بار وارده به انتهای تونل (محل درب ضد انفجار) حاصل از این مدلسازی که به صورت بار انفجاری وابسته به زمان است به نرمافزار ABAQUS جهت تحلیل و مقایسه انواع دربهای ضد انفجار انتقال یافت. با توجه به باروارده به درب ضد انفجار، درب لولایی با هندسه مختلف تخت و قوسی با استفاده از نرمافزار ABAQUS تحلیل شده و تغییرمکان ماکزیمم و تنش فون- میسز دربها با هم مقایسه شد. نتایج بررسیها نشان میدهد که عملکرد درب قوسی بهتر از درب تخت است.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Ambient Dose Equivalent Measurement by the Spectro-Dosimeter Method in the NaI(Tl) Detectorاندازهگیری معادل دز محیطی با استفاده از روش طیف- دزیمتر در آشکارساز یدور سدیم NaI(Tl)243250207031FAمرتضیطاهریدانشگاه ارومیهاکبرعبدی سرایدانشگاه ارومیهحسینذکی دیزجیدانشکده پدافند غیر عامل- دانشگاه جامع امام حسین (ع)Journal Article20201021A minimum level of radiation needs to be detected for determining the value of the radiation dose equivalent. Typically, the output of a nuclear radiation detector cannot be used directly for determining the value of the radiation dose equivalent. Via changing the response function or the readout of the detector, effort is made to obtain a logical relation between the output of the detector and the dose equivalent. For this purpose, various hardware and software methods are used. In this research, the ambient dose equivalent H*(10) of gamma radiation is determined by applying the spectro-dosimeter method, which is based on the software method. In this method, the readout of the NaI(Tl) detector is subdivided into several energy intervals based on the pulse height, thereby, each energy interval has its own conversion factor. Conversion coefficients are obtained by using the Gaussian elimination method. The ambient dose equivalent H*(10) is determined from the detector readout without spectra deconvolution. Using the Geant4 Monte Carlo code simulation, the response function and the readout of the NaI(Tl) detector for gamma radiation are determined and then the conversion coefficients are calculated for obtaining the ambient dose equivalent. Fairly good agreement is observed between the simulation data and experimental results for the detector response function. The results show that by finding the conversion coefficients function in the energy range of 0.03-3 MeV in this dosimetric method for values equivalent to the ambient dose of gamma the measurement error percentage decreases and the measurement accuracy increases.آشکارسازی تابش در یک سطح حداقلی برای تعیین مقدار معادل دز تابش لازم است. به طور معمول، خروجی یک آشکارساز تابشهای هستهای بهصورت مستقیم برای تعیین معادل دز تابش قابل استفاده نیست. با تغییر تابع پاسخ و یا خروجی آشکارساز، سعی میشود یک ارتباط منطقی بین خروجی آشکارساز با مقدار معادل دز ایجاد گردد. برای این منظور روشهای متعدد سختافزاری و نرمافزاری به کار برده میشود. در این تحقیق، معادل دز محیطی H<sup>*</sup>(10) تابش گاما بر اساس روش طیف- دزیمتر که بر پایه روش نرمافزاری است، تعیین میگردد. در این روش، دادههای خروجی آشکارساز NaI(Tl) بر اساس ارتفاع پالس به چندین بازه انرژی تقسیمبندی شده و هر بازه انرژی یک ضریب تبدیل دارد. ضرایب تبدیل از طریق بهکارگیری روش حذف گووسی بهدست آمده است. معادل دز محیطی H<sup>*</sup>(10) از خروجی آشکارساز و بدون انجام واپیچیدگی طیف، تعیین میشود. با استفاده از شبیهسازی کد مونت کارلوی Geant4 تابع پاسخ و خروجی آشکارساز NaI(Tl) برای تابش گاما تعیین گردیده و سپس ضرایب تبدیل برای تعیین معادل دز محیطی محاسبه شده است. مابین دادههای شبیهسازی و نتاج تجربی برای تابع پاسخ آشکارساز فوق توافق نسبتاً خوبی وجود دارد. نتایج حاصل نشان میدهد که با یافتن تابع ضرایب تبدیل در محدوده انرژی 03/0 - 3 مگا الکترون ولت در این روش دزیمتری برای مقادیر معادل دز محیطی گاما مقدار درصد خطا حاصل از اندازهگیری کاهش و همچنین دقت در اندازهگیری افزایش مییابد.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023Prediction of Voltage Stability Status Considering the Impact of the Protection Systemپیشبینی وضعیت پایداری ولتاژ با در نظر گرفتن تاثیر سیستم حفاظتی251263207032FAپوریااکبرزاده اقدمدانشکده برق دانشگاه صنعتی سهندحمیدخوشخواستادیار گروه قدرت دانشکده برق دانشگاه صنعتی سهند0000-0002-7474-8180Journal Article20201109In this paper, a novel algorithm is proposed to evaluate the dynamic voltage stability of power systems considering the effect of the protection system. In short circuit occurrence and the correct or incorrect operation of the protection system, which leads to the operation of the power system in N-1 and N-k conditions, respectively, this algorithm can accurately predict the voltage stability status. For this purpose, in this method a suitable feature set is presented, according to which a database will be prepared to record the conditions in which the disturbances and correct / incorrect operations of the protection system leading to voltage instability, occur. By grouping and encoding this data, while the size of the database decreases and the execution speed of the algorithm increases significantly, the effect of errors caused by the measuring equipment is also reduced as much as possible. Finally, with the help of this data set and a new index called FSI, the stability of the system in online conditions is accurately predicted. The results of dynamic simulations performed on the Nordic32 network show that the proposed method can predict the instability occurrence several seconds to a few minutes in advance and thus provide ample opportunity for the system operators to implement appropriate control measures.در این مقاله، الگوریتمی نوین برای ارزیابی وضعیت پایداری ولتاژ دینامیکی سیستمهای قدرت با در نظر گرفتن تاثیر سیستم حفاظتی ارائه میشود. این الگوریتم در شرایط وقوع اتصالکوتاه و عملکرد صحیح و یا ناصحیح سیستم حفاظتی که بهترتیب منجر به عملکرد سیستم قدرت در شرایط N-1 و N-k میشود، میتواند به دقت وضعیت پایداری ولتاژ را پیشبینی کند. برای این منظور، در این روش یک دسته ویژگی مناسب ارائه میشود که بر اساس آن بانک داده مربوط به شرایطی که وقوع اغتشاش و عملکرد صحیح / ناصحیح سیستم حفاظتی منجر به ناپایداری ولتاژ میشود، تهیه خواهد شد. سپس با گروهبندی و کدگذاری این دادهها، ضمن آنکه حجم بانک داده کاهش و سرعت اجرای الگوریتم افزایش چشمگیر مییابد، تاثیر خطاهای ناشی از تجهیزات اندازهگیری نیز تا حد امکان کاهش خواهد یافت. در نهایت، به کمک این بانک داده و شاخص جدیدی با نام FSI وضعیت پایداری سیستم در شرایط برخط بهطور دقیق پیشبینی خواهد شد. نتایج حاصل از شبیهسازیهای دینامیکی که در شبکه Nordic32 اجرا شده، نشان میدهد که روش ارائه شده میتواند وقوع ناپایداری را چندین ثانیه تا چند دقیقه قبل از وقوع آن پیشبینی کند و فرصت کافی در اختیار اپراتورها برای اجرای اقدامات کنترلی مناسب قرار دهد.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Simulation and Calculation of Buried Blast Pressure in Sandy Soils and the Presentation of Pressure Relationships by RSM Methodologyشبیهسازی و محاسبه فشار انفجار مدفون در خاکهای ماسهای و ارائه روابط فشار با روش RSM265272207034FAسید احمدحسینیمجتمع دانشگاهی پدافند غیرعامل، دانشگاه صنعتی مالک اشتر، ایراننویدمنافیمجتمع دانشگاهی پدافند غیرعامل، دانشگاه صنعتی مالک اشتر، ایرانJournal Article20210123<em>Today, with the spread of security threats, considering passive defense requirements has become more tangible. Since important and sensitive structures are usually designed and executed underground, for a safe and economical design of such structures, it is necessary to obtain a good quantitative estimate of the amount of buried explosion pressure in a variety of underground environments. For this purpose, in this study, the amount of blast pressure buried in different types of sandy soils has been investigated. The proposed numerical model has been made in Ansys- Autodyn finite element software and after verification of this proposed model with laboratory tests, the pressure from the buried explosion in various sandy soils has been extracted. Then, by comparing the outputs of this research with the results of the relations of TM 5-855-1 instruction, the accuracy of TM relations has been evaluated. Finally, to calculate the pressure in sandy soils with appropriate accuracy, several relationships have been presented using the response surface methodology (RSM).</em>امروزه با توجه به گسترش تهدیدات امنیتی لزوم توجه به الزامات پدافند غیرعامل بیشازپیش احساس میگردد. ازآنجاییکه سازههای مهم و حساس معمولاً بهصورت زیرزمینی طراحی و اجرا میگردند، جهت طراحی ایمن و اقتصادی این سازهها، لازم است تا برآورد کمی مناسبی از میزان فشار انفجار مدفون در انواع محیطهای زیرزمینی حاصل شود. بههمین منظور، در این پژوهش به بررسی میزان فشار انفجار مدفون در انواع خاکهای ماسهای پرداختهشده است. مدل عددی پیشنهادی در نرمافزار اجزای محدود اتوداین ساختهشده و پس از صحتسنجی این مدل پیشنهادی با تستهای آزمایشگاهی، فشار حاصل از انفجار مدفون در انواع خاکهای ماسهای استخراجشده است. در ادامه، با مقایسه خروجیهای این تحقیق با نتایج روابط دستورالعمل 1- 855- 5 TM، ارزیابی دقت روابط TM انجامشده است. در انتها، با استفاده از روش سطح پاسخ (RSM)، روابطی با دقت مناسب جهت محاسبه فشار در خاکهای ماسهای ارائه شده است.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Presentation of a New Defense Framework Against the Distributed Denial of Service Attacks Using the Software Defined Networkارائه یک چارچوب دفاعی جدید در برابر حملات منع سرویس توزیعشده با استفاده از شبکه نرمافزار محور273284207035FAمسعودمحمدعلیپورگروه امنیت شبکه و رمزنگاری، پژوهشکده فضای مجازی، دانشگاه شهید بهشتی، تهران، ایرانسعیدشکرالهیگروه امنیت شبکه و رمزنگاری، پژوهشکده فضای مجازی، دانشگاه شهید بهشتی، تهران، ایرانJournal Article20210130The lack of fixed infrastructure and centralized management in most cloud computing networks causes serious security threats. In the past few years, different approaches have been taken based on the distributed software defined network (SDN) to counterbalance these facing challenges. One of these common approaches is the SDN-based Pro Defense framework which uses the threshold intrusion detection to improve security. Although the distributed software defined network is weak in the face of distributed denial of service attacks, it expands the scalability of the above-mentioned framework and resolves the point-breaking problems. On the other hand, utilizing the threshold criterion escalates the network vulnerability. In this research, the author suggests a framework called distributed SDN-based multilayer Pro Defense framework and inspires the input filter or the digital signature, and the hash function based on the Merkle tree is employed as the intrusion prevention agent. This article resolves the threshold intrusion detection criteria by utilizing the Snort intrusion detection system. The results of implementing the suggested framework indicates that it has acceptable traffic control, intrusion detection speed, and stable security.اغلب شبکههای فاقد زیرساخت ثابت و مدیریت متمرکز مبتنی بر رایانش ابری با چالشهای امنیتی متعددی مواجه هستند. اخیراً، روشهای متفاوتی از شبکه نرمافزار محور (SDN) توزیعشده جهت رویارویی با چالشهای پیشرو بهره بردهاند. از جمله روشهای رایج، چارچوب دفاعی پیشفعال متکی بر شبکه نرمافزار محور توزیعشده است که از راهحل تشخیص نفوذ آستانهای بهمنظور ایجاد، حفظ و ارتقاء امنیت استفاده میکند. شبکه نرمافزار محور توزیعشده بر مقیاسپذیری این چارچوب افزوده و معضل شکست نقطهای را برطرف میسازد؛ اگرچه در مقابل تهدیدات منع سرویس توزیعشده آسیبپذیر است. بهکارگیری راهحل آستانهای<strong> </strong>تشخیص نفوذ نیز این آسیبپذیری را تقویت میکند. در این مقاله با الگوبرداری از چارچوب دفاعی فوق، چارچوب پیشفعال چندلایه متکی بر شبکه نرمافزار محور توزیعشده پیشنهاد میشود. در چارچوب دفاعی پیشنهادی با انجام عملیات فیلترینگ دادهها بهوسیله یک فیلترکننده ورودی یا امضای دیجیتال متکی بر تابع چکیدهساز با الگوی درختی مرکل که هر دو بهعنوان عوامل پیشگیریکننده نفوذ هستند از سیستم تشخیص نفوذ Snort جهت رفع مشکل معیار آستانهای تشخیص نفوذ نیز استفاده شده است. نتایج حاصل از پیادهسازی نشانگر این است که چارچوب پیشنهادی ما از سرعت تشخیص نفوذ، کنترل ترافیک و ثبات امنیتی لازم بهرهمند است.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Evaluation of Antimicrobial Effect of Ozonized Water on the Environmental Decontaminationبررسی اثر ضد میکروبی آب ازونیزه جهت رفع آلودگی محیطی285291207036FAمحمدابراهیممیناییجامع امام حسین(ع)محمدرضااکبریمیکربشناسی پزشکی- نانوبیوتکنولوژی0000-0003-2059-1402شاهینفریدفردانشگاه جامع امام حسین(ع)Journal Article20210225<em>In this study, the antimicrobial effect of ozonized water was investigated in the DSM2500-SK environmental decontamination vehicle. Following a biological attack, rapid and timely decontamination would prevent the spread of contamination and reduce the extent of damage. The antimicrobial effect of ozonized water was investigated on some bacteria such as Pseudomonas aeruginosa (peripheral bacteria), Staphylococcus aureus (gram-positive bacteria), Escherichia coli (gram-negative bacteria) and Bacillus subtilis (spores), according to the existing standards. In the first step the sensitivity of bacteria was determined by the modified microdilution method by minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of ozonized water and in the next step the concentration of the ozonized water affecting bacteria was investigated. Rising temperatures, impurities and pH cause the instability of ozonized water. The results showed that the minimum lethal dilution of bacteria by ozonized water at a concentration of 3 ppm was 7.5×104 for Staphylococcus aureus, 7.5×105 for Pseudomonas aeruginosa, and 7.5×105 CFU/mL for Escherichia coli O157 and this disinfectant solution has no effect on bacterial spores. For the determination of the effective concentration of ozonized water on bacteria, it was found that the outlet of 100% concentrated ozonized water is capable of disinfection.</em><strong>در این تحقیق، اثر ضد میکروبی آب ازونیزه در خودرو رفع آلودگی محیطی </strong><strong>DSM2500</strong>-<strong>SK</strong><strong> بررسی شد. به دنبال وقوع یک حمله بیولوژیک، رفع آلودگی سریع و به موقع موجب جلوگیری از گسترش آلودگی و کاهش دامنه آسیب خواهد شد. بر اساس استانداردهای موجود، اثر ضد میکروبی نسبت به آب ازونیزه خروجی از دستگاه بر روی باکتریهایی نظیر سودوموناس آئروژینوزا (باکتری محیطی)، استافیلوکوکوس اورئوس (باکتری گرم مثبت)، اشریشیا کولی (باکتری گرم منفی) و باسیلوس سوبتیلیس (باکتری اسپوردار) مورد بررسی قرار گرفت. میزان حساسیت باکتریها با روش اصلاح شده میکرودایلوشن (</strong><strong>Micro</strong> <strong>Dilution</strong><strong>) و از طریق تعیین حداقل غلظت مهار کنندگی و کشندگی آب ازونیزه تعیین و در مرحله بعدی غلظت آب ازونیزه موثر بر باکتریها بررسی شد. افزایش دما، ناخالصی و </strong><strong>pH</strong><strong> باعث ناپایدار شدن آب ازونیزه میشود.</strong> <strong>نتایج بهدست آمده نشان داد که حداقل رقت کشنده باکتری توسط ازون باقیمانده در آب با غلظت </strong><strong>ppm</strong><strong> 3 برای باکتری استافیلوکوکوس اورئوس </strong><strong>CFU/mL</strong> <strong>10<sup>4</sup>×5/7، برای باکتری سودوموناس آئروژینوزا </strong><strong>CFU/mL</strong><strong> 10<sup>5</sup>× 5/7، برای باکتری اشریشیا کولی 157</strong><strong>O</strong><strong> </strong><strong>CFU/mL</strong><strong> 10<sup>5</sup>×5/7 است و این محلول گندزدا بر روی اسپور باکتریها تاثیر ندارد. در تعیین غلظت موثر آب ازونیزه بر باکتری مشخص شد که غلظت 100 درصد آب ازونیزه خروجی از دستگاه قادر به گندزدایی است.</strong>دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023A Survey of Modeling Approaches of Interdependent Infrastructures form the Resilience Viewpointرویکردهای مدلسازی سیستمهای زیرساخت دارای وابستگی متقابل از منظر تابآوری293306207037FAرضاغفارپورعلوم و تحقیقات تهرانفریدموذندانشگاه صنعتی شیرازسعیدزمانیاندانشگاه جامع امام حسین (ع)Journal Article20210314Nowadays, the human life in societies has become impossible without reliable operation of critical infrastructures. Therefore, many studies have focused on their operation and protection. One of the main fields in infrastructural studies is system modeling, especially with regard to interdependency. In this paper, recent studies on the modeling of interdependent infrastructures are reviewed. The purpose is to further protect the systems against disruptive events and to prevent cascading disturbances. One of the most effective and practical concepts in evaluating the impacts of perturbation and cascading interruptions is the concept of system resilience. Resilience, also known in the defense literature as passive defense, can provide a precise understanding of the probability of interdependent infrastructures' functionality. Therefore, in this review paper, interdependency modeling in infrastructure systems is investigated through the approach of system resilience against threats and disruptive events. To this end, various modeling approaches, are categorized into empirical, agent-based, system dynamics, economic, and network-based approaches and studied. Finally, the challenges that the researchers may face in the future studies are pointed out. The description of present challenges can pave the way for significant future developments in the field of interdependent infrastructure system modeling.<strong>دردنیای امروزی، استمرار زندگی در جوامع بشری بدون فعالیت مستمر زیرساختهای حیاتی امکانپذیر نیست. از این رو نحوه بهرهبرداری و حفاظت از زیرساختهای حیاتی مورد توجه مطالعات بسیاری قرار گرفته است. یکی از زمینههای اصلی در مطالعات زیرساختها چگونگی مدلسازی سیستمها به خصوص با وجود وابستگیهای بین آنهاست. در این مقاله، مروری بر مطالعات اخیر در مورد چگونگی مدلسازی سیستمهای زیرساخت دارای وابستگی متقابل انجام شده است. هدف این مطالعه شناسایی راهکارهای حفاظت بیشتر از سیستمها در برابر اختلالات پیشآمده در یک سیستم و جلوگیری از انتشار آن به سیستمهای دیگر است. یکی از مفاهیم مؤثر در مطالعه اثرات اختلال و قطعیهای آبشاری، مفهوم تابآوری سیستم است. بهبود تابآوری که نزدیکترین مفهوم به پدافند غیرعامل در حوزه زیرساخت است، میتواند درک صحیحی از احتمال استمرار فعالیت زیرساختهای وابسته ارائه نماید. بنابراین، در این مقالهی مروری، نحوه مدلسازی وابستگی در سیستمهای زیرساخت با رویکرد تابآوری سیستم در برابر تهدیدات بررسی شده است. در این راستا، انواع رویکردهای مدلسازی با دستهبندی به پنج گروه تجربی، عامل-محور، دینامیکی، اقتصادی و شبکهای معرفی و بررسی شدهاند. انتهای مقاله، چالشهای پیش روی محققین برای انجام مطالعات بیشتر تصویر شده است. موارد ارائه شده میتواند راهگشای بسیاری از پیشرفتهای آتی در زمینه مدلسازی زیرساختهای وابسته باشد.</strong>دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Study of False Target Creation in Synthetic Aperture Radarsایجاد اهداف کاذب در سامانههای تصویربردار راداری SAR307317207038FAنرجسسادات واعظدانشگاه صنعتی مالک اشترمجتبیبهزاد فلاح پوردانشگاه صنعتی مالک اشترحمیددهقانیمالک اشترJournal Article20210327Radar imaging systems are a complement to passive remote sensing. In this technology, target's characteristics are determined by the target's scattering field. The target's characteristics in radar images cause the detection of the target. Different methods are used for deception in passive defense. One of these methods replaces the main target by a false one. The weakness of this approach is that the replacement of distributed targets is very difficult and, in some cases, almost impossible. In this paper, while studying the effective parameters, a method is proposed to replace the false targets by calculating the scattering fields. This model gives the response close to the main target. The proposed method facilitates the implementation of the false target as deception. According to the results obtained in this paper, behavioral patterns of the targets in the image are derived from the shape of the target in the direction and location of the scattering centers. The material of the target has a small effect on the target's pattern and the greatest effect on the magnitude of scattering fields. Other parameters are independent and fixed for all targets. So, creating the scatterer centers of the target with its own shape and planting them on the ground can be used to deceive the radar system. The simulation of the target's scattering fields is performed using CAD model in CST software and image formation of the target's scattering data is performed in MATLAB software.سامانه تصویربردار راداری به عنوان مکملی برای سنجندههای سنجش از دور غیرفعال مطرح است. در این فناوری، میدان پراکندگی از هدف، مشخصه هدف را تعیین میکند. مشخصه هدف در تصاویر راداری سبب آشکارسازی هدف توسط این سامانه میگردد. روشهای مختلفی برای فریب در مقاصد پدافند غیرعامل استفاده میشود. یکی از این روشها، اهداف کاذب، جایگزین هدف اصلیاند. در اینصورت جایگزینی اهداف بزرگ مشکل و ناممکن میشود. در این مقاله با محاسبه میدانهای پراکندگی اهداف، ضمن بررسی پارامترهای مؤثر، روشی برای جایگزینی اهداف کاذب با پاسخ مشابه اهداف اصلی ارائه میشود. این روش سهولت در اجرای هدف کاذب به عنوان فریب را دربردارد. با توجه نتایج بدست آمده در این مقاله، الگوی رفتاری هدف در تصویر، حاصل از شکل هدف در جهت و موقعیت مراکز پراکندگی است. پارامتر جنس تاثیر اندکی بر الگوی هدف دارد و بیشترین تاثیر این پارامتر بر دامنه بازگشتی است. پارامترهای دیگر مستقلاند و برای همه اهداف ثابت است. در نتیجه ساخت مراکز پراکنده کننده هدف با شکل خود هدف و کاشت آنها بر روی زمین به عنوان فریب در سامانه راداری قابل استفاده است. شبیه سازی میدانهای پراکندگی هدف در نرم افزار CST با استفاده از مدل CAD انجام میشود و تشکیل تصویر هدف از دادههای پراکندگی در نرم افزار MATLAB صورت میگیرد.دانشگاه جامع امام حسین (ع)علوم و فناوریهای پدافند نوین2676-293512320211023The Impact of Building Orientation and Visibility Geometry in SAR Imagesتاثیر جهتگیری ساختمان و هندسه دید در تصاویر SAR319334207041FAفاطمهامجدی پوردانشگاه صنعتی مالک اشترمجتبیبهزاد فلاح پوردانشگاه صنعتی مالک اشترحمیددهقانیمالک اشترJournal Article20210401The detection of buildings using SAR radar images is of great interest due to its widespread use. But the complexity of SAR images poses many challenges to object recognition. One of the factors affecting the brightness of SAR images is the geometry of the vision, which causes the deformation of the building and in some cases even the omission of the buildings in radar images. The geometry of view includes incident angle, look angle, squint angle and direction of imaging, which is less discussed in research sources. In this paper, we intend to extract the buildings that are affected by changing the geometric parameter and analyze and prove the reason for its change. In other words, by detecting images with different incident angles, the orientation of the buildings affected by this change is identified. For this purpose, the time series images of Sentinel 1 satellite related to Baghistan region of Tehran are used. Using the CMV2 change detection method, the results show that changing the angle of impact by 10 degrees, leads to the removal of the workshop or factory sheds lying in the direction of 20 degrees to the horizon from the radar image.تشخیص ساختمان با استفاده از تصاویر رادرای SAR با توجه به کاربرد گسترده آن بسیار مورد توجه است. اما پیچیدگی تصاویر SAR تشخیص اشیا را با چالشهای زیادی مواجه کرده است. یکی از عوامل تاثیرگذار بر شدت روشنایی تصاویر SAR هندسه دید است که باعث تغییر شکل ساختمان و حتی در برخی از موارد دیده نشدن ساختمان در تصاویر راداری میشود. هندسهدید شامل زاویه برخورد، زاویه دید، زاویه کجی و جهت تصویربرداری است که در منابع تحقیقاتی کمتر به آن پرداخته شده است. در این مقاله قصد داریم ساختمانهایی که متأثر از تغییر پارامتر هندسهدید هستند را استخراج کرده و علت تغییر آن را تحلیل و اثبات کنیم. به عبارت دیگر، با استفاده از آشکارسازی تصاویر با زاویه برخورد مختلف، جهت گیری ساختمانهایی که متاثر از این تغییر است، شناسایی میشوند. بدین منظور از تصاویر سری زمانی ماهواره سنتینل۱ مربوط به منطقه باغستان تهران استفاده شده است. با استفاده از روش آشکارسازی تغییرات CMV2 نتایج نشان داده است که با تغییر ˚10 زاویه برخورد، سولههای کارگاهی یا کارخانهای در جهت ˚20 نسبت به افق از تصویر راداری حذف خواهند شد.