per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
179
185
204066
معرفی روش CTLS چند مرجعی برای مکانیابی غیرفعال اهداف راداری
Multi Reference CTLS Method for Passive Localization of Radar Targets
حمید تربتی فرد
hamidhtf@yahoo.com
1
فرخ حجت کاشانی
kashani@iust.ac.ir
2
یاسر نوروزی
y.norouzi@aut.ac.ir
3
محمود آتشبار
matashbar@iust.ac.ir
4
دانشگاه آزاد اسلامی - تهران جنوب
دانشگاه علم وص صنعت ایران
دانشگاه صنعتی امیرکبیر
دانشگاه علم وص صنعت ایران
مکانیابی غیرفعال اهداف کاربرد زیادی در جنگ الکترونیک و پدافند غیرعامل دارد. روش TDOA روشی با دقت بالا در زمینه مکانیابی اهداف است. در روشهای TDOA یکی از گیرندهها بهعنوان گیرنده مرجع فرض شده است و اختلاف زمانی رسیدن سیگنال به گیرندههای دیگر نسبت به گیرنده مرجع را اندازهگیری و پردازش میکنند. یکی از الگوریتمهای با دقت بالای TDOA الگوریتم CTLS است که نیاز به مقداردهی اولیه مناسب دارد. در این مقاله برای کاهش خطای مکانیابی این الگوریتم، الگوریتم CTLS چند مرجعی پیشنهاد میشود. حال اگر بهجای یک گیرنده مرجع، چندین گیرنده مرجع درنظر گرفته شود، دقت الگوریتم CTLS بیشتر میشود. در روش پیشنهادی مدل-سازی براساس دو گیرنده مرجع انجام میگیرد. نتیجههای شبیهسازیهای انجام شده نشان میدهد در این روش در SNR های مختلف، بهبود خود را حفظ کرده است و با کمی افزایش زمان پردازش روش پیشنهادی باعث بهبود دقت الگوریتم CTLS میشود.
Passive target localization has many applications in electronic warfare and passive defense. TDOA is the most accurate method in target localization. Following this method, one of the receivers is assigned as reference receiver and time difference of arrival between other receivers and reference receiver is measured. The target location is estimated by processing of these TDOA. The CTLS is one of TDOA based algorithm that has high accuracy and needs suitable initialization. In this paper, multi reference CTLS algorithm is proposed. CTLS algorithm accuracy was improved when multi reference receiver are considered instead of one reference receiver. Simulation results show that the proposed algorithm in different SNR, keep its improvement just with little increase of time processing and better performance compared to CTLS algorithm has been obtained.
https://adst.ihu.ac.ir/article_204066_8b935f7c35c016f3b96b7d0d58d48b16.pdf
مکان یابی
TDOA
CTLS
Target Localization
TDOA
CTLS
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
187
197
204067
مدل ترکیبی مکانیابی سایتهای راداری سطحی با ملاحظه پدافند عامل و غیرعامل.
A Combination Model for Surface Radar Sites Location Considering Active and Passive Defence
محسن توحیدی
mts5890@gmail.com
1
اردشیر احمدی
ardeshir79@yhoo.com
2
حسینعلی حسن پور
hahassan0@yahoo.com
3
دانشگاه امام حسین(ع)
دانشگاه امام حسین(ع)
دانشگاه امام حسین(ع)
تحقیق حاضر تلاشی جهت ارائه یک مدل ریاضی جدید و روش ترکیبی برای حل آن بهمنظور مکانیابی سایتهای راداری سطحی است. در این تحقیق پس از بیان مفاهیم، هدفها و روشهای مکانیابی سایتهای راداری، مدل ریاضی مسئلهیابی سایتهای راداری سطحی ارائه می-شود. سپس روشی دو مرحلهای برای حل این مسئله پیشنهاد میشود. در مرحله نخست، مؤلفههای معیار برای انتخاب محل استقرار سایت-های راداری بر مبنای اصول پدافند (غیرعامل و عامل) شناسایی، دستهبندی، امتیازدهی و اولویتبندی میشوند و به سبب آن که مسائل مکانیابی از نوع NP-hard هستند، در مرحله دوم از الگوریتم فرا ابتکاری شبیهسازی تبرید برای حل مدل ریاضی جدید استفاده می-شود. در روش حل مسئله، جمع امتیازات اکتسابی توسط هر یک از محلهای پیشنهادی، تعیینکننده اولویت آن محل برای ورود به شبکه راداری است تا تمام حالتهای ممکن آن توسط الگوریتم شبیهسازی تبرید بررسی شود. همچنین با دادههای فرضی، مسئله مکانیابی سایتهای راداری سطحی در منطقه خلیج فارس با استفاده از روش ترکیبی پیشنهادی حل میشود.
In this research a mathematical model for surface radar sites’ location and a combination methodology for its resolution are presented. Hence after expressing the related conceptions, the goals and radar sites location method, mathematical model for radar sites location is expressed. Then a two-step method for solving this problem is offered. At the first step, the criteria parameters for selecting radar sites’ location based on passive and active defense are identified, classified, scored and prioritized. Since these kinds of problems are NP-hard, simulated annealing algorithm for solving this new mathematical model has been used. In this method the total score for each candidate location determines the position priority for radar network. So all of the possible states for the radar network are survived by stimulated annealing algorithm. Finally, a radar sites’ location problem in the Persian Gulf beaches using presented simulated annealing algorithm with hypothesis data has been resolved.
https://adst.ihu.ac.ir/article_204067_2b2c862c610b18a568429bf338b69c7e.pdf
مکانیابی
سایت راداری
الگوریتم تبرید شبیهسازی شده
پدافند عامل و غیرعامل
Location
Radar Sites
Simulated Annealing Algorithm
Passive and Active Defence
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
199
211
204068
پیادهسازی سختافزاری یک پردازنده رمزنگاری خم بیضوی کارآمد در میدان GF(2163)
The FPGA Implementation of an Efficient Elliplic Curve Cryptographic Process over GF(2163)
مسعود معصومی
m.masoumi2018@chmail.ir
1
حسین مهدیزاده
2
دانشگاه آزاد اسلامی واحد اسلامشهر
دانشگاه آزاد اسلامی واحد اسلامشهر
در این مقاله، پردازنده ضرب عددی خم بیضوی کارآمد در میدان باینری GF(2163) طراحی و با استفاده از کدهای قابل سنتز VHDL پیادهسازی شده است. طراحی معماریهای جدید و کارآمد برای واحدهای محاسبات میدان و بهویژه واحد محاسباتی ضرب میدان منجر به کاهش طول مسیر بحرانی پردازنده شد. همچنین استفاده از اجرای موازی عملیات ضرب میدان در الگوریتم ضرب عددی Lopez-Dahab و جدا نمودن مسیر جمع دو نقطه از کلید باعث بهبود عملکرد پردازنده در مقایسه با بهترین پیادهسازیهای تاکنون گزارش شده در ادبیات مربوطه شد. نتیجههای پیادهسازی نشان داد که ضرب عددی در این پردازنده با طول رقم 41 G = در زمان μs 92/11 با حداکثر فرکانس MHz251 بر روی تراشه XC4VLX200 Xilinx – با اشغال 19606 اسلایس اجرا می-شود، جایی که G طول کلمه در ضربکننده میدان سریال- موازی است.
A new and highly efficient architecture for elliptic curve scalar point multiplication is presented. To achieve the maximum architectural and timing improvements, the critical path of the Lopez-Dahab scalar point multiplication architecture has been reorganized and reordered such that logic structures are implemented in parallel and operations in the critical path are diverted to noncritical paths. The results show that with G= 41, the proposed design is able to compute GF(2163) elliptic curve scalar multiplication in 11.92μs with the maximum achievable frequency of 251 MHz on Xilinx Virtex-4 (XC4VLX200), where G is the digit size of the underlying digit-serial finite field multiplier. The results of synthesis show that in this implementation 19606 slices or 22% of the chip area is occupied.
https://adst.ihu.ac.ir/article_204068_be5ffb5c4faa8f0b3250ddf391969bea.pdf
رمزنگاری خم بیضوی
محاسبات میدانی
ضرب عددی نقطه
پیادهسازی سختافزاری
FPGA
Elliptic Curve Cryptography
Scalar Point Multiplication
FPGA Implementation
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
213
222
204069
طراحی و شبیهسازی یک روش مسیریابی مبتنی بر کیفیت سرویس در شبکه سیار موردی
Design and Simulation of a Routing Algorithm based on Quality of Service in Mobile Ad Hoc Network
محمدرضا حسنی آهنگر
mrhassani@iust.ac.ir
1
سعید طاهری
2
محمود صالح اصفهانی
msaleh@ihu.ac.ir
3
دانشگاه امام حسین(ع)
امام حسین(ع)
امام حسین(ع)
ماهیت شبکه سیار موردی، تغییرات ساختاری مداوم و عدم وابستگی گرهها به یک واحد مرکزی است. در این مقاله با استفاده از قوانین محاسبات پهنای باند مصرفی در قراردادهای چند پخشی سعی شده برای جلوگیری از کاهش تدریجی نرخ تحویل بستهها، در زمانی که سرعت گرههای شبکه در حال افزایش است، قرارداد سودمندی ارائه شود. قرارداد سودمند که با ایجاد تغییر در قرارداد مبنا تعبیه شده است، QB-ODMRP نامگذاری شده تا بتوان توانمندیهای آن را از قرارداد مبنا ODMRP تشخیص داد. در این راستا شبیهسازی بر روی60 گره متحرک و غیر متحرک با نرمافزار گلوموسیم نسخه 03/2 انجام شده و در سناریوهای متفاوت کیفیت سرویس در آنها مورد تجزیه و تحلیل قرار گرفته است. نتیجههای شبیهسازی نشان داد که روش پیشنهادی توانسته است 25 درصد نرخ تحویل بستهها را بهبود بخشد و تأخیر انتها به انتها نسبت به قبل را در حدود 30 درصد کاهش دهد، که این فاکتورها همگی در بهبود کیفیت سرویس نقش اساسی دارند.
Due to limitations of mobile Ad Hoc networks, adding service quality to routing protocols of these networks improves their effectiveness and results in attaining requirements of passive defence. The main characteristics of mobile Ad Hoc networks are continuous changes in network structure as well as independency of nodes to any central unit. In this paper, using bandwidth calculation rules of multi-cast protocols a new routing method (named QB-ODMRP) is suggested based on a basic protocol (ODMRP) in order to avoid increasing delivery time (decreasing network speed) while increasing speed of individual nodes. Simulations on 60 dynamic and static nodes using ‘Glomusium v 2.03’ software in various service quality scenarios show that the suggested method can improve delivery rate as much as %25 and decrease end-to-end delay %30, resulting in improving service quality.
https://adst.ihu.ac.ir/article_204069_9d3fe969a38d5b1c98dbb155159763d3.pdf
شبکههای سیار موردی
مسیر یابی
کیفیت سرویس
چند پخشی
Ad Hoc Networks
routing
Quality of Service
Multi Casting
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
223
230
204070
ارائه یک الگو برای جانمایی و چیدمان داخلی یک بندر فرضی با ملاحظات پدافند غیرعامل
Presentation of an Interior Layout Pattern for a Presumptive Port based on Passive Defence Consideration
مهدی کرباسیان
mkarbasi@mut-es.ac.ir
1
عبدالامیر فرهند
2
مالک اشتر
مالک اشتر
هدف از این مقاله، ارائه یک الگو برای طراحی و چیدمان داخلی بنادر از منظر پدافند غیرعامل است .بنابراین، ابتدا اجزاء داخلی بنادر مانند اسکلهها، انبارها، مراکز تجمع نیروی انسانی و تأسیسات حساس شناسایی میشود. سپس انواع تهدیدات مرتبط با حوادث بالقوه طبیعی، تروریستی و نظامی که بندر را تهدید میکند، مشخص و متناسب با آن تمهیدات لازم اتخاذ میشود. این تمهیدات در قالب طراحی سیستماتیک چیدمان پیاده میگردد. به این صورت که ابتدا با توجه به تمهیدات، اهمیت و میزان ارتباط اجزاء بندر نسبت به یکدیگر بیان میشود. در مرحله دوم به رابطه فعالیتها پرداخته میشود. سپس فضای مورد نیاز و فضای در دسترس با توجه به محدودیتهای عملی وتعدیلی مقایسه میشوند. در گام بعدی به نمودار فضا-رابطه ودیاگرام رابطه فعالیتها پرداخته میشود. در قدم چهارم به طراحی چیدمان جایگزین با نتیجهگیری از دیاگرام رابطه فعالیتها پرداخته شده و در پایان به ارزیابی چیدمان جدید پرداخته خواهد شد.
The purpose of this article, is to present a pattern for the interior layout and arrangement of port elements from a passive defense view point. To this end, firstly the internal sections of port including piers, warehouse, human force concentrations and vital installations are recognized. Thereafter, different types of threats related to potential natural accidents- terrorist and military attacks- jeopardizing the port are determined and appropriate measures are taken accordingly. These provisions are effected within a systematic layout planning (SLP) frame work. So that, at the first stage, regarding provisions, the significance and the degree of relation between different port segments are delineated. In the second stage, the relations between different activities are dealt. Then, the required and the available space regarding partial and moderate limitation are compared. In the subsequent step, the space relation diagram and the diagram of relation activities are considered. The fourth step deals with the alternative layout design and drawing conclusions from the relation activities diagram. Finally an evaluation of the new layout is presented.
https://adst.ihu.ac.ir/article_204070_a6b6ba34192ad5f586bb38aae37d084a.pdf
چیدمان بنادر
طراحی سیستماتیک چیدمان
پدافند غیر عامل
رابطه فعالیت ها
Layout of the Ports
Passive Defense
Relation between Activities
Systematic Layout Planning
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
231
241
204071
ارائه الگوریتمی نوین بهمنظور بهرهبرداری از منابع تولید پراکنده در هنگام بروز بحران در شبکه سراسری برق
Presentation of a New Algorithm for the Operation of DG Resources in Electrical Interconnection Grids over the Critical Conditions
حبیب اله اعلمی
halami@ihu.ac.ir
1
هادی رمضانی
2
دانشگاه امام حسین
دانشگاه صنعت اب و برق
بهعلت احتمال بروز ناپایداری در شبکه، طبق استانداردهای بینالمللی، بهرهبرداری از منابع تولید پراکنده در هنگام بروز بحران در شبکه سراسری برق مجاز نیست. قانون فوق، اجرای پدافند غیرعامل در سیستمهای قدرت را غیرممکن میسازد. این مقاله الگوریتم جدیدی به-منظور بهرهبرداری از ریزشبکههایی که دارای مولدهای تولید پراکنده از نوع ژنراتور سنکرون با توربین گازی هستند را ارائه میکند. دو روش حذف بار سنتی و هوشمند با استفاده از فرکانس و مشتق فرکانس، شبیهسازی شده است. همچنین با توجه به شرایط بار و تولید، ابزارهای حذف بار و تغییر مد گاورنرهای مولدهای فوق بهمنظور برقراری پایداری ریزشبکه بهکار رفتهاند. علاوه بر این، تعقیب تغییرات بار شبکه توسط مولدها نیز مورد مطالعه قرار گرفته است. الگوریتم پیشنهادی بر روی شبکه واقعی و در فضای نرمافزار DIgSILENT شبیهسازی شده است. نتیجهها نشان میدهد با استفاده از الگوریتم پیشنهادی، میتوان از ریزشبکه در شرایط بحران بهرهبرداری کرد.
Based on the IEEE standards, distributed generation (DG) resources should not be operated over the critical situations in the interconnection power grid, because of the network instability considerations. These standards are severe restrictions for passive defense implementation in the power systems. In this paper, a new algorithm for employment of the micro grids equipped with the Gas Turbine Synchronous Generators (GTSG) is proposed. In an islanded distributed network, consumption and generation in the micro grids have a vital role. In this paper, two different types of load shedding methods, namely, traditional and intelligent methods are simulated considering frequency and derivative of the frequency in the system. Furthermore, according to the load and generation situations, "load shedding" and "changing the mode of the GTSG governors" are used as two different tools to prepare a robust stability in the system. Load following service is another subject which is studied in this paper. The proposed model has been applied to the load profile of an actual system using DIgSILENT software. The results show that over the critical conditions, operation of the DGs in the islanded mode is possible and reliable.
https://adst.ihu.ac.ir/article_204071_12b0fae8679d03b0fb93d8243f5bb269.pdf
پدافند غیرعامل
تولید پراکنده
ریزشبکه
ژنراتور سنکرون با توربین گازی
Distribution Generation
Gas Turbine Synchronous Generator (GTSG)
Micro Grid
Passive Defence
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
243
248
204072
تهیه نانو الیاف پلیمری حاوی عسل برای پوششدهی زخم سطحی در برابر عوامل میکروبی
Preparation of Nanoscale Polymer Fibers Containing Honey for Superficial Wound Protection against Microbial Agents
مینو صدری
sadrimino@gmail.com
1
سمیه خلجی
2
دانشگاه صنعتی مالک اشتر
دانشگاه صنعتی مالک اشتر
نانو الیاف پلیمری زیستسازگار با قابلیت بالای آنتی میکروبیالی جهت پوششدهی زخمهای سطحی، مانند زخمهای حاصل از سوختگیها استفاده میشود، همچنین این نانو الیاف میتواند جایگزین مناسب برای پانسمانهای معمولی باشد. در این تحقیق، الکتروریسندگی کیتوسان و ایجاد نانو الیاف با خواص آنتی باکتریال مورد بررسی قرار گرفت. نانو الیاف با قطر میانگین بهطور تقریبی nm150-50 و توزیع اندازه مناسب بهوسیله الکتروریسی محلول پلیمری کیتوسان / پلی اتیلن اکسید (PEO) ساخته شدند. بررسیها نشان دادند که محلول پلیمری کیتوسان / پلی اتیلن اکسید با نسبت 90 به 10 بهترین نسبت پلیمری برای تشکیل نانو الیاف است. در ادامه خواص آنتی باکتریال عسل آویشن تأیید و بهعنوان افزودنی با درصدهای مختلف به محلول پلیمری کیتوسان/ پلی اتیلن اکسید اضافه شد. در بررسی تصاویر میکروسکوپ الکترونی پویشی دیده شد که نانو الیاف کیتوسان / پلی اتیلن اکسید با درصدهای پایین عسل، همانند محلول کیتوسان / پلی اتیلن اکسید بدون افزودن عسل، نانو الیافی با اندازه میانگینnm 120-70 و توزیع اندازه مناسب تشکیل میدهد، هرچند با افزایش مقدار عسل به محلول پلیمری کیتوسان، گرهها افزایش یافته بودند، اما پاشش یکنواختی بر روی صفحه آلومینیومی بدون وجود قطرات دیده شد.
Synthesis of biocompatible polymer nanofibers is valuable, due to their use as a cover for burns and as a replacement bandage because of their antimicrobial properties. In this study, electrospinning of chitosan and nanofibers production with antibacterial properties was investigated. Nanofibers with average size ranges between 50-150 nm and appropriate size distribution were synthesized by electrospun of chitosan/poly ethylene oxide polymer solution. The results showed that the chitosan/poly ethylene oxide polymer solution with a ratio of 90 to 10 nm is the optimized polymer solution for nanofiber preparation. Afterwards, the thyme honey with antibacterial properties was used as additives (with different percentages) in the polymer solution. The scanning electron microscopy (SEM) images were showed appropriate size distribution of about 70-120 nm for chitosan/poly ethylene oxide nanofibers with low percentages of honey, like solution of chitosan/poly ethylene oxide without the addition of honey. However, with increase of the amount of honey to chitosan polymer solution, the nodes were increased, but the uniformity of spray droplets on the aluminum screen was observed.
https://adst.ihu.ac.ir/article_204072_46e1e064ba500cb96355be8c2fed11b9.pdf
الکتروریسی
کیتوسان
پلی (اتیلن اکسید)
عسل
نانو الیاف
زیستسازگاری
Electrospinning
chitosan
Poly (Ethylene Oxide)
Nano Fibers
Environmental Compatibility
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
249
258
204073
کاهش سطح مقطع راداری از طریق بررسی نامریی ساز الکترومغناطیسی استوانه ای ساده شده
Simplified Cylindrical Electromagnetic Cloak for Reduction of RCS
علی قائدی
alighaaedi@modares.ac.ir
1
زهرا اطلس باف
atlasbaf@modares.ac.ir
2
عباس پیرهادی
a_pirhadi@sbu.ac.ir
3
دانشگاه تربیت مدرس
دانشگاه تربیت مدرس
دانشگاه شهید بهشتی
در این مقاله، عملکرد و حساسیت نامرییساز الکترومغناطیسی استوانهای با درنظر گرفتن اثر انواع مختلف نامرییسازهای ساده شده، مورد بررسی قرار گرفته است. هر چند که از نظر کاهش انعکاس و پراکندگی، عملکرد نامرییسازهای ساده شده مانند عملکرد نامرییساز ایدهآل نیست، ولی ضمن قابلیت تحقق عملی، استتار و کاهش سطح مقطع راداری قابل قبولی را ارائه میدهند. برای بررسی عملکرد ساختارهای اشاره شده، معادله موج درون نواحی مختلف استخراج شده و حل دقیق آن بهصورت تحلیلی ارائه شده است. نتیجههای تحلیلی حاصل با نتیجههای شبیهسازی تمام موج مبتنی بر روش المان محدود با استفاده از بسته نرمافزاری COMSOL Multiphysics مقایسه و تأیید شده است. شبیهسازی برای محاسبه سطح مقطع راداری در محدوده فرکانسی MHz 10 تا GHz 3 انجام شده است. نتیجههای شبیهسازی، کاهش سطح مقطع راداری بیش از dB 18 برای نامرییساز ساده شده را نشان میدهد.
In this paper, the performance and sensitivity of the cylindrical electromagnetic cloak considering the effect of different simplified cloaks are investigated. The performance of simplified cloak is less than ideal cloak however, it can be realized in practice with acceptable level of RCS reduction. The exact wave solution for different regions of cylindrical cloak is derived and validated with full-wave simulations results based on COMSOL Multiphysics. Numerical experiments of RCS are performed for frequency band from 10MHz to 3GHz. The results of simulation show more than 18dB RCS reduction for simplified cloak.
https://adst.ihu.ac.ir/article_204073_fe74e275a3799f4f36738206d11d1312.pdf
نامریی ساز الکترومغناطیسی
انتقال مختصات
پراکندگی
معادله موج
استتار
سطح مقطع راداری
Electromagnetic Cloak
Coordinate Transformation
Scattering
Wave Equation
Invisibility
RCS
per
دانشگاه جامع امام حسین (ع)
علوم و فناوریهای پدافند نوین
2676-2935
2980-8022
2012-09-22
3
3
259
267
204074
مقایسه عددی عملکرد دیوار حائل وزنی با دیوار خاک مسلح در برابر بارگذاری انفجار
Numerical Investigation of Gravity and Reinforced Soil Wall Performance under Blast Loading
محمدحسن بازیار
baziar@iust.ac.ir
1
مسعود رابطی مقدم
rabetionline@yahoo.com
2
سجاد قلی پور
sgholipour63@gmail.com
3
دانشگاه علم و صنعت ایران
دانشگاه علم و صنعت ایران
دانشگاه علم و صنعت ایران
در مقاله حاضر، دو نوع از دیوارهای حائل مرسوم در پروژههای عمرانی (دیوار حائل وزنی و خاک مسلح) در دو ارتفاع مختلف مدنظر قرار گرفته و میزان تغییر شکل و همچنین مدهای تغییر شکل دیوارها در اثر بارگذاریهای مختلف انفجار بهکمک تحلیل عددی توسط نرمافزار FLAC-2D مورد مقایسه قرار گرفته است. در تمامی تحلیلهای انجام شده مشاهده گردید که دیوارهای خاک مسلح عملکرد بهمراتب بهتری (تغییر شکلهای کمتر) نسبت به دیوارهای وزنی نشان میدهند. بهعلاوه مدهای تغییر شکل دو نوع دیوار متفاوت از یکدیگر بوده بهطوریکه برای دیوارهای وزنی مد غالب تغییر شکل، مد واژگونی، و برای دیوارهای خاک مسلح، برحسب شرایط بارگذاری و ارتفاع دیوار، مدهای تغییر شکل از شکم دادگی دیوار تا واژگونی آن متغیر است. همچنین نتیجهگیری شد که پارامتر نسبت میرایی خاک و فاصله انفجار از دیوار به-شدت تغییر شکل دیوار در اثر انفجار را تحت تأثیر قرار میدهند.
In this paper, dynamic response of the two most common retaining walls in geotechnical engineering practices (conventional gravity retaining walls and geosynthetic reinforced soil (GRS) walls) to blast loading are investigated and compared using FLAC 2D. After large number of numerical simulations, it was concluded that performance of the GRS walls is better than conventional gravity retaining walls. Also it is observed that deformation modes of these two types of walls are different. In all analysis, dominant mode of lateral deformation for the gravity types of walls (for both 5 and 10 m) was overturning mode combination with sliding at base of wall, whereas for GRS walls in addition to sliding at base, deformation modes are start from bulging at low blast intensity loading and tends to overturning mode with increasing blast loading intensity. Therefore location of the maximum lateral displacement of gravity walls is occurred at wall crown in all the analysis, whereas in GRS walls, location of the maximum lateral displacement start from middle of the wall height in bulging mode and shift to the surface of the wall with increasing blast loading because of overturning mode domination. Also, it is concluded that soil damping and distance from blast loading adversely affected blast induced deformation of the walls.
https://adst.ihu.ac.ir/article_204074_ccefb17169ee53f508ffb4463a728f56.pdf
دیوار حائل وزنی
دیوار خاک مسلح
بارگذاری انفجار
مد تغییر شکل
مدلسازی عددی
FLAC-2D
Gravity Retaining Walls
Geosynthetic Reinforced Soil (GRS) Walls
Deformation Shape Modes
Numerical Analysis
Blast Loading
FLAC-2D