@article { author = {peymani forushani, sajjad and حسینی, سید احمد}, title = {SDOF System Solution of the Two-Way RC Slab Subjected to Blast Loading}, journal = {Journal of Advanced Defense Science & Technology}, volume = {12}, number = {2}, pages = {185-196}, year = {2021}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Reinforced concrete slabs are one of the most frequently used blast-resistant structural elements. The RC slab behavior under blast loading is nonlinear and complicated. The maximum slab displacement differs by the amount of explosive, support conditions, steel ratio, etc. In the present paper, the maximum deflection of two-way RC slabs subjected to blast loading is studied. To this purpose, the RC slabs are replaced by SDOF equivalent systems with bilinear stiffnesses through determining the equivalent mass and stiffness. The results of comparing the analytical proposed method with the nonlinear analysis by the LS-Dyna software and the method specified by UFC 3-340-02 guideline show that in most loading conditions and slab geometries, the output of proposed method is more economical than the UFC guideline. In addition, whilst the UFC method is not applicable for all time ranges, the proposed method can determine the structural element response at any time range.}, keywords = {RC Slab,Blast,System with a Single degree of Freedom,Non-Linear Analysis,UFC 3-340-02 Guideline}, title_fa = {حل سیستم تک درجه آزادی دال بتن مسلح دوطرفه تحت بارگذاری انفجاری}, abstract_fa = {دال‌های بتن مسلح از پرکاربردترین اعضای سازه‌ای مقاوم در برابر انفجار هستند. رفتار دال بتن مسلح در بارگذاری انفجاری پیچیده و غیرخطی است. برحسب مقدار ماده منفجره، وضعیت تکیه‌گاه‌ها، نسبت تسلیح و غیره، آسیب و خیز حداکثر در دال متفاوت خواهد بود. در این پژوهش روش تحلیلی بر مبنای حل سیستم تک درجه آزادی برای محاسبه خیز حداکثر دال بتن مسلح دوطرفه تحت بار انفجار پیشنهاد شد. با حل معادلات سیستم تک‌درجه آزادی دال، محاسبه پاسخ‌های حداکثر و مقایسه آن با نتایج تحلیل‌های غیرخطی با نرم‌افزار LS-Dyna و پاسخ‌های دستورالعمل 02- 340- 3 UFC مشخص شد که در اکثر شرایط بارگذاری و هندسه دال، نتایج تحلیل تک‌درجه آزادی ارائه ‌شده، اقتصادی‌تر از پاسخ‌های دستورالعمل UFC می‌باشد. همچنین نمودارهای پاسخ دستورالعمل 02- 340- 3 UFC و رابطه ایمپالس در بازه‌های زمانی محدودی قادر به محاسبه پاسخ اعضای خمشی است اما روش تحلیلی مورد بررسی، برای تمام شرایط بارگذاری و هندسی دال پاسخگو می­باشد.}, keywords_fa = {دال بتن مسلح,بارگذاری انفجاری,سیستم تک‌درجه آزادی,تحلیل غیرخطی,دستورالعمل 02-340-3 UFC}, url = {https://adst.ihu.ac.ir/article_206694.html}, eprint = {https://adst.ihu.ac.ir/article_206694_138007a9efa1d7f4e9d5c2c63e77b379.pdf} }