@article { author = {Seyman, S. and Ebrahimzade, A.}, title = {Numerical Investigation of the Effect of Geometry on the Energy Absorption Rate of Sandwich Panels under Blast Loading}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {347-355}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In the recent years, advent of new technologies in the field of Structural Engineering, elements such as Sandwich Panels has attracted more attention, which are lightweight and highly resistant.Sandwich components are  the most widely used elements to resist against the pressure of explosion wave. The core of the sandwich panels does the most important role in absorbing and dissipating the energy of the explosion.And geometric shape of the core can have a decisive role in the amount of energy absorption. Accordingly, in this paper, the effect of geometric shape of the core of the steel sandwich panel on its behavior and amount of energy absorption against the explosion wave is analyzed by numerical methods. Abaqusfinite element software is used for simulation and analyzing. Validation of the responses obtained from numerical solution was performed with experimental data of valid papers. In the following, sandwich panels with four different types of regular and easily fabricated cores, were modeled under different pressures of explosive wave. And the effect of core geometry on the amount of energy absorption and displacement was investigated.Two important criteria in designing these types of sandwich panels are maximizing energy absorption and minimizing maximum displacement. The results show that at low pressures Model 4 with a quadrilateral horizontal core has the maximum energy absorption and minimum displacement value. However, at high pressures Model 2 with a hexagonal vertical core has the minimum displacement and Model 1 with a quadrilateral vertical has the maximum energy absorption. In other words related to the explosion pressure, a sandwich panel with the special geometry can have the best performance.}, keywords = {Sandwich Panel,Numerical Analysis,Explosion Wave,Energy Absorption}, title_fa = {بررسی عددی تأثیر هندسه بر میزان جذب انرژی پانل‌های ساندویچی تحت بارگذاری انفجاری}, abstract_fa = {در سال­های اخیر با پیشرفت فناوری­های نوین در حوزه سازه، توجه زیادی به المان­هایی مانند پانل‌های ساندویچی شده است. این نوع از المان­ها درعین‌حال که وزن کمی دارند دارای مقاومت بالایی نیز هستند. اجزای ساندویچی  از پرکاربردترین المان­ها برای مقابله با فشار ناشی از موج انفجار هستند. هسته­ پانل‌های ساندویچی مهم­ترین نقش را در جذب و استهلاک انرژی، بر عهده دارد. شکل هندسی هسته می‌تواند در میزان جذب انرژی نقش تعیین‌کننده‌ای داشته باشد. بر این اساس، در این مقاله، اثر شکل هندسی هسته پانل‏ ساندویچی فولادی، بر رفتار و میزان جذب انرژی آن در برابر موج انفجار ‏با روش عددی بررسی‌شده است. حل عددی با استفاده از نرم‌افزار اجزای محدود آباکوس انجام می‌شود. اعتبارسنجی پاسخ‏ها‏ی به‌دست‌آمده از حل عددی، با داده‏ها‏ی تجربی مقالات معتبر انجام‌ شده است. در ادامه، پانل‌های ساندویچی با چهار نوع هسته مختلف متداول و دارای قابلیت ساخت آسان، تحت اثر فشارهای متفاوت موج انفجار مدل شدند و اثر هندسه هسته بر میزان جابجایی و جذب انرژی، موردبررسی قرار گرفت. دو معیار مهم در طراحی این نوع پانل‌های ساندویچی بیشینه کردن میزان جذب انرژی و کمینه کردن مقدار بیشینه جابجایی است. نتایج به‌دست‌آمده نشان می­دهد، در فشارهای پایین مدل 4 با هسته دارای شبکه افقی چهارضلعی، بیشترین میزان جذب انرژی و کمترین جابجایی را دارد. با این وجود، در فشارهای بالا مدل 2 با هسته دارای شبکه عمودی شش­ضلعی دارای کمترین میزان جابجایی و مدل 1 با شبکه عمودی شش­ضلعی دارای بیشینه میزان جذب انرژی است. به عبارت دیگر وابسته به میزان فشار انفجار، پانل ساندویچی با هندسه خاصی می­تواند بهترین عملکرد را داشته باشد.   }, keywords_fa = {پانل ساندویچی,تحلیل عددی,موج انفجار,جذب انرژی}, url = {https://adst.ihu.ac.ir/article_205775.html}, eprint = {https://adst.ihu.ac.ir/article_205775_945ff6571ba778b0f8a9bfdb45850b39.pdf} } @article { author = {Ghouhestani, S. and Karkon, M. and Yaghoubi, M. and Khalife, S.}, title = {Investigation of Friction Damper Behavior in Cross Braces Subjected to Blast Load}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {357-367}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Several hazards often affect the stability of structures, and when designing and analyzing the structure, this should be considered. With increasing seismic strength of the structure, the strength of the structure increases against other forces, such as the explosion force. One of the most commonly used building design systems for lateral loads is the use of a cross bracing system. Using cross braces with friction damper can have more damping and energy absorption compared to cross braces without friction damper; it will behave better in big bangs. In this paper, the effect of cross braces with a friction damper and no friction damper on the performance of concrete structures against explosive force has been studied. For this purpose, the displacement and relative displacement of the floors in different modes of loading of the explosion have been calculated. Finally, the results show the effect of friction damper on reducing lateral displacement and relative displacement of the floors, so that in the structure with the damper compared with the structure without a damper, the lateral displacement and relative displacement of the floors significantly decreased. Studies show that adding a friction damper to the structure increases the stiffness of the structure, so the frequency of the structure is reduced.}, keywords = {Blast Load,Cross Brace,Friction damper,opensees}, title_fa = {بررسی رفتار میراگر اصطکاکی در مهاربندهای ضربدری در برابر نیروی انفجار}, abstract_fa = {خطرات متعدد اغلب بر روی پایداری سازه‌ها اثر می‌گذارد و هنگام طراحی و آنالیز سازه باید این نکته در نظر گرفته شود. با افزایش مقاومت لرزه‌ای سازه، مقاومت سازه در مقابل نیروهای دیگر نظیر نیروی انفجار نیز افزایش پیدا می‌کند. یکی از سامانه‌های متداول طراحی ساختمان‌ها در برابر بارهای جانبی استفاده از سامانه مهاربند ضربدری می‌باشد. استفاده از مهاربندهای ضربدری فولادی مجهز به میراگر اصطکاکی می‌تواند میراگری و جذب انرژی بیشتری در مقایسه با مهاربندهای ضربدری فولادی فاقد میراگر داشته باشد و در انفجارهای بزرگ رفتار بهتری از خود نشان دهد. در این مقاله تأثیر مهاربندهای ضربدری دارای میراگر اصطکاکی و فاقد میراگر اصطکاکی در عملکرد سازه بتنی در برابر نیروی انفجار مطالعه شده است. به این منظور جابه‌جایی و تغییرمکان نسبی طبقات در حالت‌های مختلف بارگذاری انفجار محاسبه گردیده است. درنهایت نتایج نشان‌دهنده تأثیر میراگر اصطکاکی در کاهش تغییرمکان جانبی و تغییرمکان نسبی طبقات می‌باشد؛ به‌طوری‌که در سازه با میراگر در مقایسه با سازه بدون میراگر، تغییرمکان جانبی و تغییرمکان نسبی طبقات به‌طور چشم­گیری کاهش یافته است. مطالعات نشان می‌دهد اضافه کردن میراگر اصطکاکی به سازه باعث افزایش سختی سازه می‌شود، بنابراین، زمان تناوب سازه کاهش می‌یابد.}, keywords_fa = {بار انفجار,مهاربند ضربدری,میراگر اصطکاکی,opensees}, url = {https://adst.ihu.ac.ir/article_205784.html}, eprint = {https://adst.ihu.ac.ir/article_205784_8d9cae7d33d88a5d270b6f9e28d39df1.pdf} } @article { author = {Taghavi Parsa, M. H. and Geravan, A.}, title = {Investigating the Destructive Effect of Explosions at Different Distances on Concrete Retaining Walls}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {369-382}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Concrete retaining walls gratitude to their significant-high mass are considered a protective barrier and explosion resistance. The fabricated walls generally made of reinforced or fiber-reinforced concrete. This study deals with investigating the destructive effects of the explosion on retaining walls made of reinforced and fiber-reinforced concrete. For this purpose, the intended wall simulated by Abaqus software with various blast loads at different distances. Then, to investigate the damage caused by the explosion, the explosives were modeled in three positions attached to the wall, at a distance of one meter and at a distance of ten meters from the wall, perpendicular to the highest midpoint of the structure and the junction of wall and ground.The modeling results showed that the explosion at the connection of the wall to the ground has more destructive effects than the detonation at the highest point of the wall. The failure load of the reinforced concrete wall and fiber-reinforced concrete at the junction of the wall to the ground equals 5 kg C4 and 10 kg TNT and 15 kg C4 and 15 kg TNT at attached and distance of one meter from the wall respectively. The failure load was equal to 60 kg C4 and 70 kg TNT and 90 kg C4 and 100 kg TNT for reinforced concrete and fiber-reinforced concrete wall respectively at a distance of 10 meters from the wall and at the junction of the wall to the ground. Also, the explosion at the position attached to the wall and one meter from the wall showed local effects on the wall and occasion local damage. However, the explosion at a distance of ten meters did not act locally due to the large distance of the explosion from the wall, and more explosives are needed to destroy the wall at this distance.}, keywords = {Explosion,ABAQUS,Reinforced Concrete Wall,Fiber-Reinforced Concrete,Failure}, title_fa = {بررسی اثر تخریبی انفجار در فواصل مختلف بر دیوار حائل بتنی}, abstract_fa = {استفاده از دیوارهای حائل بتنی به‌دلیل جرم زیاد گزینه مطلوبی برای مقاومت در برابر انفجار است. این دیوارها عموماً به‌صورت بتن آرمه یا بتن الیافی ساخته می‌شوند. در این پژوهش اثرات تخریبی انفجار بر دیوار حائل از جنس بتن آرمه و بتن الیافی مورد مطالعه قرار گرفته است. به ‌این منظور، دیوار در نرم‌افزار آباکوس شبیه‌سازی شده و بارهای انفجار متفاوت در فواصل مختلف بر آن اعمال شده است. سپس برای بررسی خرابی حاصل از انفجار، مواد منفجره در سه حالت چسبیده به دیوار، در فاصله یک متری و در فاصله ده متری از دیوار، عمود بر بالاترین نقطه‌ میانی سازه و نیز محل اتصال دیوار و زمین مدل‌سازی شده­اند. نتایج حاصل از مدل‌سازی نشان داد که انفجار در محل اتصال دیوار و زمین تأثیرات مخرب‌تری نسبت به انفجار در بالاترین نقطه دیوار دارد. بارهای منجر به تخریب دیوار بتن آرمه و بتن الیافی در محل اتصال دیوار به زمین، در فاصله چسبیده به آن برابر با 5 کیلوگرم C4 و 10 کیلوگرم TNT و در فاصله یک متری از دیوار برابر با 15 کیلوگرم C4 و 15 کیلوگرم TNT خواهد بود. در فاصله‌ 10 متری از دیوار و در محل اتصال دیوار به زمین، بارهای منجر به تخریب برابر با 60 کیلوگرم C4 و 70 کیلوگرم TNT برای دیوار بتن آرمه و 90 کیلوگرم C4 و 100 کیلوگرم TNT برای دیوار بتن الیافی می‌باشد. همچنین انفجار در فاصله چسبیده به دیوار و یک متری، تأثیر موضعی بر دیوار داشته و باعث خرابی‌های موضعی می‌گردد. این در حالی است که انفجار در فاصله ده متری به ‌علت فاصله زیاد انفجار از دیوار به‌صورت موضعی عمل نکرده و برای تخریب دیوار در این فاصله ماده منفجره بیشتری لازم است.}, keywords_fa = {انفجار,آباکوس,دیوار بتن آرمه,بتن ‌الیافی,خرابی}, url = {https://adst.ihu.ac.ir/article_205783.html}, eprint = {https://adst.ihu.ac.ir/article_205783_58cd60dcafd8d3760a313735bd2a0b3c.pdf} } @article { author = {Sharif Moghadam, H. and Dashti, R.}, title = {Valuation of Distribution System Lines to Improve the Restoration Process and Enhance the Resilience Index with Considering DGs}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {383-389}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In order to increase the resilience of distribution system against natural disaster and human attacks, before the events, the value of the monitored system assets should be identified according to different factors so that during the crisis, restoring of lost loads be done faster and qualitatively better. This paper is based on price-based modeling in which load value, to consider the importance of demand side; failure rate, line availability; intrinsic value of lines, to consider investment cost, as well as topology factor, to emphasize The configuration of grid was taken into consideration. In order to observe the impact of DG on the grid lines evaluation, it was investigated in two states: with and without DGs. The results, in addition to demonstrating the network sensitivity to the influential factors, show that distributed generation has a potential to change ranking of valuation and to help improve the process of restoring the distribution system.}, keywords = {resilience,Distributed Networks,Asset Evaluation,Passive Defense,Distributed Generation}, title_fa = {ارزش‌گذاری خطوط سامانه‌های توزیع برق جهت تسریع روند بازیابی و بهبود شاخص تاب‌آوری با در نظر گرفتن تولیدات پراکنده}, abstract_fa = {برای افزایش میزان تاب­آوری سامانه توزیع در برابر مخاطرات باید قبل از حادثه، ارزش دارایی‌های سامانه تحت کنترل با در نظر گرفتن فاکتورهای مختلف مشخص باشد تا در زمان بحران بازیابی بارهای ازدست‌رفته با سرعت و کیفیت بهتری انجام پذیرد. در این مقاله اساس مدل‌سازی بر مبنای قیمت است که در آن ارزش بار، جهت درنظر گرفتن اهمیت سمت تقاضا؛ نرخ خرابی، جهت بررسی دسترس‌پذیری خط؛ ارزش ذاتی خطوط، جهت درنظر گرفتن هزینه سرمایه‌گذاری و همچنین فاکتور توپولوژی، جهت تأکید بر آرایش شبکه مدنظر قرار داده شد. همچنین برای مشاهده تأثیر DG در ارزش‌گذاری خطوط شبکه، در دو حالت شبکه با DG  و بدون DG  مورد بررسی قرار گرفته شد. نتایج حاصل علاوه برنشان دادن حساسیت شبکه به عوامل اثرگذار، نشان می‌دهد اضافه کردن تولیدات پراکنده این پتانسیل رادار است تا رتبه‌بندی ارزش‌گذاری را تغییر دهد و در بهبود روند بازیابی شبکه توزیع مفید واقع شود.}, keywords_fa = {تاب‌آوری,سامانه‌های توزیع,ارزش‌گذاری دارایی‌ها,پدافند غیرعامل,تولیدات پراکنده}, url = {https://adst.ihu.ac.ir/article_205776.html}, eprint = {https://adst.ihu.ac.ir/article_205776_5e55c00e1564cda3cb31d9040345c02e.pdf} } @article { author = {Tayebi, A. H. and Sharifi, R. and Salemi, A. H. and Faghihi, F.}, title = {Presentation of an Algorithm for Identification of the Most Vulnerable Bus in Electric Smart Grid Through Cyber-Attack Based on State Estimation}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {391-401}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Considering the power grids automation and network data transferring in telecommunication infrastructure, the possibility of planning a cyber-attack grows up intensively. In this regard, the optimization of the budget for attack (BA) and budget for defense (BD) in a power network through cyber-attack is so crucial. In this paper, regarding the cyber invasion phase, the choice of the most vulnerable operating bus using the state estimation technique through a new algorithm is analyzed and simulated. For this purpose, false data injection is performed on the data sent from the PMU in such a way that it is not detectable to the network dispatching operator under the invasion. As a case study implementation of the suggested algorithm for a 14 IEEE bus network is carried out and the best bus in terms of exposure under attack is identified. The performance of this algorithm is based on the results obtained from state estimating of the grid after occurring a cyber-attack on different buses. Finally, the part of the grid, which the destruction of information in that part leads to the most damage to the grid, is determined.}, keywords = {false data injection,undetectable attack,power system,state estimation,measurement vector}, title_fa = {ارائه الگوریتمی جهت شناسایی آسیب‌پذیرترین شین در شبکه هوشمند برق در حمله سایبری مبتنی بر تخمین حالت}, abstract_fa = {با توجه به خودکارسازی شبکه‌های قدرت و مبادله داده‌ها در یک زیرساخت مخابراتی، احتمال طرح‌ریزی حمله سایبری بسیار بالا است. در این راستا بهینه‌سازی بودجه‌های حمله و دفاع در حمله سایبری در شبکه قدرت از اهمیت خاصی برخوردار است. در این مقاله در راستای فاز تهاجم سایبری به شبکه قدرت، انتخاب آسیب‌پذیرترین شین عملیاتی با استفاده از فن تخمین حالت طی الگوریتم جدیدی تحلیل و شبیه‌سازی‌شده است. برای این منظور تزریق داده غلط به اطلاعات ارسالی از PMU به‌گونه‌ای که قابل‌تشخیص برای بهره‌بردار شبکه تحت تهاجم نباشد صورت می‌پذیرد. به‌عنوان یک مطالعه موردی پیاده‌سازی الگوریتم پیشنهادی برای یک شبکه 14 شینِ IEEE انجام‌شده است و بهترین شین ازنظر قرارگیری تحت تهاجم شناسایی‌شده است. عملکرد این الگوریتم مبنی بر نتایج حاصل از تخمین حالت شبکه پس از رخداد حمله سایبری بر روی شین‌های مختلف است. درنهایت قسمتی از شبکه که تخریب اطلاعات در آن بخش بیشترین آسیب را به شبکه وارد می‌کند مشخص می‌شود.}, keywords_fa = {تزریق داده غلط,حمله غیرقابل تشخیص,سامانه قدرت,تخمین حالت,بردار اندازه‌گیری}, url = {https://adst.ihu.ac.ir/article_205779.html}, eprint = {https://adst.ihu.ac.ir/article_205779_77379b9ffcca837c4eb3f12e0610cebc.pdf} } @article { author = {Yari, S and Khoshkhoo, H. and Asadi, E.}, title = {A Novel Special Protection System to Prevent Long-Term Voltage Instability against Graffite Attacks}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {403-414}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Graffiti bombs are one of the modern non-destructive weapons that by causing short circuit in the power systems result in blackout in these networks. The main purpose of this paper is to propose a Special Protection System (SPS) to prevent long-term voltage instability after graffite attacks. In this SPS, the power grid is divided into several voltage control area (VCAs) in order to carry out corrective actions in a coordinated manner and reduce the risk of the instability. Then, according to the voltage stability status of each area determined by RPRI index, the proposed SPS will be used to prevent long-term voltage instability. In this paper, using the DPL environment of DIgSILENT PowerFactory software, the proposed SPS is implemented and tested on IEEE 39-Bus and Nordic32 networks. The results of simulations performed under different N-1, N-2 and N-3 contingencies and comparison of them with previous ones verify the appropriate performance of the proposed method.}, keywords = {: Graffite Bombs,long term voltage stability,special protection system}, title_fa = {یک سامانه حفاظت ویژه جدید جهت جلوگیری از وقوع ناپایداری ولتاژ بلندمدت در مقابل حملات گرافیتی}, abstract_fa = {بمب‌های گرافیتی از جمله سلاح‌های غیر مخرب مدرن هستند که با ایجاد اتصال کوتاه در سامانه‌های قدرت منجر به وقوع خاموشی سراسری در این شبکه‌ها می‌شوند. هدف اصلی این مقاله ارائه یک سامانه حفاظت ویژه (SPS) جهت جلوگیری از وقوع ناپایداری ولتاژ بلندمدت پس از حملات گرافیتی است. در این سامانه حفاظت ویژه، برای آنکه اقدامات اصلاحی با هماهنگی مناسبی انجام شود و خطر ناپایداری کاهش یابد، با استفاده از مفهوم فاصله الکتریکی، شبکه قدرت به چند ناحیه کنترل ولتاژ (VCA) تقسیم می‌شود. سپس با توجه به وضعیت پایداری ولتاژ در هر ناحیه که به کمک شاخص RPRI تعیین می‌شود، سامانه حفاظت ویژه ارائه ‌شده برای جلوگیری از ناپایداری ولتاژ بلندمدت مورد استفاده قرار خواهد گرفت. در این مقاله، با استفاده از محیط DPL نرم‌افزار DIgSILENT PowerFactory، سامانه حفاظت ویژه پیشنهاد شده بر روی شبکه‌های IEEE 39-Bus و Nordic32 پیاده‌سازی و آزمایش شده است. نتایج شبیه‌سازی‌های انجام شده در شرایط وقوع اغتشاش‌های N-1، N-2 و N-3  مختلف و مقایسه آن‌ها با روش‌های پیشین، تائید کننده عملکرد مناسب روش پیشنهاد شده است.}, keywords_fa = {بمب گرافیتی,ناپایداری ولتاژ بلندمدت,سامانه حفاظت ویژه}, url = {https://adst.ihu.ac.ir/article_205781.html}, eprint = {https://adst.ihu.ac.ir/article_205781_13b9b83a3fec9f52ce155a2fc3910727.pdf} } @article { author = {عسکری, سعید and Sahami, Habib and aliabadi, abbas}, title = {Elaborating Deterrent Role and Developing Electric Storage Devices In Distribution Network, Based on Passive Defense Perspective}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {415-427}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Electric storage technologies have different levels of early stages of R&D, and today power systems, especially power grid in Iran, are highly regarded by planners and operators. Because of inherent characteristics of power networks and the presence of many vulnerabillities, using storage systems in power networks is inevitable in order to protect the critical infrastructures and maintain the economy and sustainability of electricity networks. The present study aims to develop the use of electrical storage devices in the distribution network from the passive defense perspective based on (qualitative) and descriptive statistics (quantitative) analysis with help of GAMS software. The country's peak courier survey shows that storage systems have more efficiency compared to power plants. In this investigation, seven types of best-performing batteries are analyzed, based on nominal power indices, efficiency, density, energy, daily insolubility and life span, and Lithium lion batteries are considered to be the most suitable for use in storage systems are introduced as most affordable.}, keywords = {Electrical Distribution Network,Passive Defense,Electric Storage Devices,Battery,GAMS}, title_fa = {تبیین نقش بازدارنده ذخیره‌سازهای الکتریکی و برنامه‌ریزی واحدهای تولیدی UC با و بدون حضور ذخیره‌سازها از منظر پدافند غیرعامل}, abstract_fa = {فناوری­های ذخیره­ساز الکتریکی سطوح متفاوتی از مراحل اولیه تحقیق و توسعه را دارا می‌باشد و امروزه در سامانه‌های قدرت به‌ویژه شبکه قدرت در ایران بسیار مورد توجه برنامه ریزان و بهره‌برداران قرار دارد. به‌دلیل  خصوصیت‌های ذاتی شبکه‌های برق و وجود آسیب‌پذیری‌های فراوان و در راستای حفاظت و  مصون‌سازی مراکز حیاتی کشور و حفظ اقتصاد و پایداری شبکه‌های برق به‌خصوص در شرایط پیک بار، لزوم استفاده از  سامانه‌های ذخیره‌ساز در شبکه‌های برق  اجتناب‌ناپذیر است. تحقیق حاضر با هدف توسعه استفاده از ذخیره‌سازهای الکتریکی در شبکه توزیع از منظر پدافند غیرعامل انجام شد که جهت تجزیه و تحلیل داده­ها روش تحلیل محتوا (کیفی) و آمار توصیفی (کمی) انتخاب و نرم‌افزار GAMS به‌عنوان ابزار پردازش اطلاعات و شبیه‌سازی استفاده ‌شده است. بررسی پیک مصرفی کشور نشان می‌دهد سامانه‌های ذخیره‌ساز نسبت به نیروگاه‌ها در جهت پیک‌سایی کاربری بهتر و بهینه‌تری دارند. پس از بررسی 7 نوع از بهترین باتری‌های کاربردی بر اساس شاخص‌های توان نامی، بازدهی، چگالی، انرژی، تخلیه خودی روزانه و طول عمر، باتری‌های لیتیوم یونی به‌عنوان مناسب‌ترین باتری جهت استفاده در سامانه‌های ذخیره‌سازی معرفی ‌شده‌اند.}, keywords_fa = {شبکه توزیع برق,پدافند غیرعامل,ذخیره‌سازهای انرژی الکتریکی,باتری,GAMS}, url = {https://adst.ihu.ac.ir/article_205782.html}, eprint = {https://adst.ihu.ac.ir/article_205782_b12d2d61a98416e35e3d7623c2c6a050.pdf} } @article { author = {maleki, mahdi and lotfi, mohammad}, title = {The Reduction of Intrusion Detection Systems Alerts by Generalizing Attack Features in Multidimensional Data Mining Domain}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {429-437}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {The volume of advanced cyber attacks is increasing today; hence the use of intrusion detection systems in networks is inevitable. One of the major problems by using these systems are considered as the high volume of low-level alarms produced. In the present paper, one of the data mining techniques called Attribute-Oriented Induction is utilized. The basis of this approach is to generalize low-level data to high-level concepts. By the development of this strategy in the field of cyber attacks, the volume of intrusion detection alarms has been decreased. This reduction not only disrupts the detection of attacks but by more focusing on the common features of the attacks, it will increase the accuracy of detection. Moreover, one of the basic foundations of this method is a generalized hierarchy designed for effective attack features. Another highlight of this investigation is to provide an intuitive approach to selecting features for generalization. The new CICIDS2017 data set was employed to evaluate the proposed method, which overcame the shortcomings of its previous data set. In conclusion, the results show a 99% decrease in alarms at the lowest generalization level and an average of 25% at the other generalization levels. In addition to the normal traffic, 14 different attack types were identified, with the Dos Hulk attack being the most frequent with 8.16% and the Heartbleed attack having the lowest frequency 0.0004%. Other capabilities were offered in the proposed method include the possibility of online analytical processing and multidimensional data mining in cyber attack space by moving at different levels of generalization..}, keywords = {Intrusion Detection System,Feature Generalization,Multidimensional Data Mining,OLAP,Multistage Attacks}, title_fa = {کاهش هشدارهای سامانه‌های تشخیص نفوذ به کمک تعمیم ویژگی‌های حملات در حوزه داده‌کاوی چندبعدی}, abstract_fa = {امروزه حجم حملات پیشرفته سایبری در حال افزایش است، لذا استفاده از سامانه­های تشخیص نفوذ در شبکه­ها امری اجتناب­ناپذیر است. یکی از مشکلات عمده در استفاده این سامانه­ها حجم زیاد هشدارهای تولیدشده سطح پایین است. در این مقاله یکی از روش‌های حوزه داده‌کاوی به نام استنتاج ویژگی محور، استفاده ‌شده است. اساس این روش تعمیم داده­های سطح پایین به مفاهیم سطح بالاست. با توسعه این راهبرد در حوزه حملات سایبری، حجم هشدارهای حسگرهای تشخیص نفوذ کاهش داده ‌شده است. این کاهش نه‌تنها باعث اختلال در شناسایی حملات نمی­شود بلکه با تمرکز بیشتر در ویژگی‌های  مشترک حملات باعث افزایش دقت در تشخیص حملات خواهد شد. همچنین یکی از پایه­های اساسی این روش، سلسله‌مراتب تعمیم است که برای ویژگی‌های مؤثر در حملات طراحی شده است. از نکات بارز دیگر این مقاله، ارائه یک روش شهودی مناسب در انتخاب ویژگی‌ها برای تعمیم است. برای ارزیابی روش پیشنهادی از مجموعه داده­ جدید CICIDS2017 استفاده شده است که کاستی‌های مجموعه داده‌های قبل خود را مرتفع نموده است. نتایج بیانگر کاهش هشدارها با نرخ 99 درصد در پایین‌ترین سطح تعمیم و میانگین 25 % در سطوح دیگر تعمیم است. در کنار ترافیک نرمال 14 نوع حمله مختلف شناسایی ‌شده است که حمله Dos Hulk با فراوانی 8.16% بیشترین فراوانی و حمله­ Heartbleed با فراوانی 0004/0% کمترین فراوانی را دارا بوده­اند. از دیگر قابلیت‌های ارائه‌شده در روش پیشنهادی، امکان عملیات پردازش تحلیلی برخط و داده­کاوی چندبعدی در فضای حملات سایبری به کمک حرکت در سطوح مختلف تعمیم است.}, keywords_fa = {سامانه تشخیص نفوذ,تعمیم ویژگی‌ها,داده‌کاوی چندبعدی,پردازش تحلیلی برخط,حملات چندمرحله‌ای}, url = {https://adst.ihu.ac.ir/article_205780.html}, eprint = {https://adst.ihu.ac.ir/article_205780_2e4270e6d6796d0b7296c08da2540bfc.pdf} } @article { author = {Asadnajafi, Narges and Mollamotalebi, Mahdi}, title = {Improving the Authentication in Smart Home Using One-Time Password and Elliptic-Curve Cryptography}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {439-450}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In smart home, most things interact with each other and with people at home. One of the benefits of smart home is the ability to control and monitor home, remotely. At the same time, smart home is potentially exposed to security problems and violates privacy of individuals. Considering that objects inside the smart home are constantly collecting private information about people's activities, if someone accesses unauthorized objects indoors, he takes control of objects and gives them data Private individuals have access to or damaged objects or disclosure of information. To prevent this, people who intend to use home-made objects must be authenticated before using it. In this paper, we propose a method for improving individual authentication based on a one-use password using smart card and elliptic curve cryptography algorithm in the smart home system. The results of the evaluations indicate improved interoperability between the user and the gateway to counteract the attacking attack compared to existing methods.}, keywords = {Improving the Authentication in Smart Home Using One,Time Password and Elliptic,Curve Cryptography}, title_fa = {بهبود احراز هویت در خانه هوشمند مبتنی بر رمز یکبار مصرف و رمزنگاری منحنی بیضوی}, abstract_fa = {در خانه­های هوشمند، اغلب اشیا با یکدیگر و با افراد خانه، در تعامل هستند. یکی از مزایای خانه هوشمند، امکان کنترل و نظارت بر خانه، از راه دور است. درعین‌حال، خانه هوشمند به‌طور بالقوه در معرض مشکلات امنیتی و نقض حریم خصوصی افراد است. با توجه به این­که اشیاء درون خانه هوشمند، همواره در حال جمع­آوری اطلاعات خصوصی از فعالیت­های افراد هستند، اگر شخصی به اشیاء داخل منزل، به‌طور غیرمجاز دسترسی یابد، اشیا را تحت کنترل خود درآورده و به داده­های خصوصی افراد دست‌یافته و باعث صدمه زدن به اشیا و یا فاش نمودن اطلاعات می­نماید. جهت جلوگیری از این امر، افرادی که قصد استفاده از اشیاء داخل منزل را دارند، باید پیش از استفاده، احراز هویت گردند. در این مقاله، روشی برای بهبود احراز هویت افراد، مبتنی بر رمز یکبار مصرف با استفاده از کارت هوشمند و الگوریتم رمزنگاری منحنی بیضوی در سامانه خانه هوشمند، ارائه‌شده است. ارزیابی روش پیشنهادی توسط منطق بن و در محیط نرم­افزار آویسپا انجام شده است. نتایج ارزیابی­ها حاکی از بهبود احراز هویت متقابل بین کاربر و گره دروازه جهت مقابله با حملات متداول به خانه هوشمند، در مقایسه با روش‌های موجود است. به‌علاوه، روش پیشنهادی از حملات استراق سمع و حمله سرک­کشی جلوگیری می­نماید که اکثر روش‌های موجود، قادر به جلوگیری از آنها نیستند.}, keywords_fa = {احراز هویت,خانه هوشمند,رمز یکبار مصرف,کارت هوشمند,رمزنگاری منحنی بیضوی}, url = {https://adst.ihu.ac.ir/article_205777.html}, eprint = {https://adst.ihu.ac.ir/article_205777_9d727b0ea06bad934349ea6ed9b41c6e.pdf} } @article { author = {shahamat, yadollah and Khalilzadeh, Javad and Reyahi, Ali}, title = {Design of a New Refractive Index Bio-Sensor Based on Photonic Crystal Suitable for DNA Sensing}, journal = {Journal of Advanced Defense Science & Technology}, volume = {11}, number = {4}, pages = {451-463}, year = {2020}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In this paper, a novel biosensor based on the photonic crystal for refractive index measurements is proposed and investigated. Three designs, known as single-cavity structure, duble and triple-cavities structures, are designed and studies. All the structures were composed of a main hole as a ring resonator localized between the input and output waveguides. Two-dimensional finite-difference time domain and plane-wave expansion methods are employed to study the output power spectrum of the structures. By absorbing DNA molecules in the PBS solution, the refractive index of the sensing holes differ which results to the output transmission spectrum of the structure shift and hence, the sensing process occure. We study the impact of different parameters on the sensing of the structures. Results show that the sensitivity of the sensor depends mainly on the geometrical properties of the defect region of the photonic crystal structure. Results shows that the single cavity and triplet structures have the best sensitivity equal to 345nm/RIU and 531compared to the other proposed sensors, respectivelly.}, keywords = {photonic crystal,Biosensor,DNA}, title_fa = {طراحی یک حسگر زیستی جدید ضریب شکستی مبتنی بر بلورفوتونی مناسب جهت تشخیص دی‌ان‌ای}, abstract_fa = {در این مقاله یک حسگر زیستی بلور فوتونی جدید جهت اندازه‌گیری ضریب شکست، پیشنهاد و مورد بررسی قرارگرفته است. سه ساختارِ تک، جفت و سه کاواکی طراحی ومطالعه شدند. در این ساختارها یک کاواک مرکزی به‌عنوان کاواک سنجش بین موج‌برهای ورودی و خروجی ساندویچ شده است. به‌منظور شبیه‌سازی و بررسی نحوه انتشار نور در ساختارها از روش تفاضل محدود در حوزه زمان و بسط موج تخت استفاده ‌شده است. جذب مولکول­های DNA موجود در محلول حسگری (PBS) منجر به تغییر در ضریب شکست مؤثر کاواک‌های سنجش شده و درنتیجه میزان عبوردهی طیفی از موج‌بر تغییر خواهد کرد. با بررسی میزان این تغییرات، فرآیند سنجش و تشخیص میسر می‌شود. با مطالعه اثر پارامترهای مختلف بر طیف خروجی ساختار، به‌منظور دستیابی به بهترین پارامترهای حسگری، مشاهده شد که پارامترهای هندسی ناحیه نقص و همچنین شعاع کاواک‌های کناری کاواک مرکزی، تأثیر قابل ‌ملاحظه‌ای بر طیف ساختارها دارند. نتایج نشان دادند که ساختار تک­کاواکی بیشینه حساسیت برابر باnm/RIU 345 و ساختار سه کاواکی بیشینه فاکتور کیفیت برابر با 531 را دارند. در مقایسه با ساختارهای قبلی انجام‌شده، ساختارهای پیشنهادی در این مقاله به نسبت کارایی به مراتب بهتری از خود نشان می­دهند.}, keywords_fa = {بلور فوتونی,زیست حسگر,.DNA}, url = {https://adst.ihu.ac.ir/article_205778.html}, eprint = {https://adst.ihu.ac.ir/article_205778_8873fe5539cf2e3832d3732dbe28b4a7.pdf} }