@article { author = {ایزدی فرد, رمضانعلی and حاجی کریمیان, حامد}, title = {The Effect of the Explosion during Fire on Steel Column Using Dynamic Explicit Method}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {141-150}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {The explosion occurrence is the most likely events that may occur during a fire incident. This paper studies on nonlinear response of steel column against an explosion during fire event by using dynamic explicit finite element scheme. In this study, the effect of temperature of steel surface at the moment of explosion and scaled distance parameter are investigated. The results show that increasing temperature to more than 400 °C may cause large displacements and ultimately led to collapse the column. It is shown that increasing the temperature of the instant explosion for more intense explosions is less effective than explosions with larger scaled distance (Z).}, keywords = {Fire,Explosion,Dynamic Explicit Method,Damage,Steel Column}, title_fa = {بررسی اثر رخداد انفجار بهنگام آتش سوزی برروی ستون فولادی به روش دینامیکی صریح}, abstract_fa = {وقوع انفجار از محتمل­ترین حوادثی است که به هنگام یک حادثه آتش‌سوزی ممکن است رخ دهد. این مقاله به کمک روش المان محدود دینامیکی صریح به بررسی پاسخ غیرخطی ستون فولادی در برابر انفجاری که به هنگام وقوع حادثه آتش­سوزی رخ داده می­پردازد. در این مطالعه اثر درجه حرارت سطح فولاد هنگام وقوع انفجار و پارامتر فاصله مقیاس­شده در ستون فولادی به روش دینامیکی صریح مورد بررسی قرار گرفته است. نتایج نشان می­دهد بالا رفتن دمای لحظه­ انفجار  به بیش از 400 درجه سلسیوس، می­تواند سبب تغییر مکان­های بزرگ و نهایتاً فروریزش ستون فولادی گردد. همچنین نشان داده شد که افزایش دمای لحظه­ی انفجار در انفجارهای شدیدتر تأثیر کمتری نسبت به انفجارهای با فاصله مقیاس شده بزرگ­تر دارد.}, keywords_fa = {آتش سوزی,انفجار,روش دینامیکی صریح,آسیب,ستون فولادی}, url = {https://adst.ihu.ac.ir/article_204250.html}, eprint = {https://adst.ihu.ac.ir/article_204250_3afb7d26d2409c03a60f127e1e04de84.pdf} } @article { author = {حسینی, سید احمد and بشیری, سجاد and دهقانی اشکذری, قاسم}, title = {Economic Evaluation of Design of the Steel Moment Frame System against Blast Load Using Both Load and resistance factors (LRFD) and Performance Based Methods}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {151-165}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {One of the most important characteristics of a good structural design is its economic and optimal design against applied loads. Nowadays, with the increase of terrorist attacks, the economic design of buildings against blast load is important. Thus in this study, the effects of design methods on the economic design of steel moment frames with different number of floors against blast loading is evaluated. The studied frames were modeled in SAP2000 and were analyzed using linear and nonlinear dynamic methods. To ensure the accuracy of simulation, the model was first evaluated by a validated numerical studies and reasonable agreement was observed between them. Each of the structural models has been analyzed and designed using load and resistance factor design method as well as performance-based design method. Results show that in the low-rise frames, the performance based design method leads to more economical design (10 to 42 % depending on the severity of the blast load and the number of floors) in comparison with the load and resistance factor design method; but by increasing the number of floors, the load and resistance factor methods is more economical than the performance based design method.}, keywords = {Blast loads,Steel moment frame,Load and resistance factors,Performance based design,Economic design}, title_fa = {ارزیابی اقتصادی طراحی سیستم قاب خمشی فولادی در مقابل بار انفجار به دو روش ضرایب بار و مقاومت و سطوح عملکردی}, abstract_fa = {یکی از مهم­ترین ویژگی­های یک طرح سازه­ای خوب، اقتصادی و بهینه بودن طرح در مقابل بارهای وارده است. امروزه، با افزایش حملات تروریستی، طراحی اقتصادی ساختمان­ها در مقابل بارگذاری انفجار اهمیت ویژه­ای دارد. بنا­براین در این تحقیق، تاثیر روش طراحی در اقتصادی بودن قاب­های خمشی فولادی با تعداد طبقات مختلف در برابر بارگذاری انفجاری مورد ارزیابی قرار می­گیرد. قاب­های مورد مطالعه در نرم افزار SAP2000 مدل شده و به روش دینامیکی خطی و غیر­خطی تحلیل شدند. برای اطمینان از صحت شبیه­سازی، این مدل ابتدا توسط یکی از مطالعات عددی معتبر مورد بررسی قرار گرفت و توافق خوبی بین نتایج شبیه­سازی تحقیق حاضر با آن مطالعه عددی معتبر حاصل شد. هریک از مدل­های سازه­ای به روش طراحی ضرایب بار و مقاومت و به روش طراحی براساس عملکرد تحلیل و طراحی شدند. نتایج نشان داد که در قاب­های با تعداد طبقات پایین، روش عملکردی منجر به طرح­های اقتصادی­تری (۱۰ تا 42 درصد بسته به شدت بار انفجاری و تعداد طبقات) نسبت به روش طراحی ضرایب بار و مقاومت می­شود؛ ولی با افزایش تعداد طبقات، روش طراحی ضرایب بار و مقاومت اقتصادی­تر از طراحی عملکردی است.}, keywords_fa = {بارهای انفجاری,قاب خمشی فولادی,ضرایب بار و مقاومت,طراحی براساس عملکرد,طراحی اقتصادی}, url = {https://adst.ihu.ac.ir/article_204251.html}, eprint = {https://adst.ihu.ac.ir/article_204251_c351ce5911e116774fef21df55553e52.pdf} } @article { author = {karimi, Mosayeb and saffari, Hamed and sivandi-Pour, Abass and mashhadi, javad}, title = {Assessment of effect of concrete slab in performance of steel moment resisting frame in progressive collapse}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {167-179}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Progressive collapse is the collapse of all or a large part of a structure precipitated by damage or failure of a relatively small part of it. These efforts tended to focus on improving redundancy and alternate load paths, to ensure that loss of any single component would not lead to a general collapse. To avoid of progressive collapse in structures, some criteria have been considered by regulations that after elimination of a member, structure should have ability to bear applied loads and transfer them to other members using substitution paths. In this study, the effect reinforced concrete slab in performance of steel moment resisting frame in progressive collapse was investigated.in this research a part of roof with structural members and connections were modeled and effective parameters of slab to increase structure capacity and crack propagation path due to corner, lateral and middle column elimination, were evaluated. In modelling, the effects of rebar, concrete strength and slab thickness on strength in different cases of column elimination were investigated. Results showed that moment resisting frame with composite slab have more capacity to bear loads due to column elimination in comparison with frame without composite slab. Also, the rate of increasing strength depends on location of column in the plan.}, keywords = {Progressive Collapse,composite slab,steel moment resisting frame,finite element analysis}, title_fa = {بررسی تأثیر دال بتنی در عملکرد قاب خمشی فولادی در برابر خرابی پیشرونده}, abstract_fa = {خرابی پیشرونده پدیده‌ای است که در آن، گسترش یک خسارت جزیی یا شکست موضعی منجر به خرابی بخش قابل‌توجهی و یا کل سازه می‌شود. برای جلوگیری از وقوع خرابی پیشرونده در سازه‌ها، تمهیداتی توسط آیین‌نامه‌ها اندیشیده شده است که در آن سازه پس از حذف ناگهانی عضو باربر ثقلی، بایستی توانایی تحمل بارهای اعمالی و انتقال آن‌ها در یک مسیر جایگزین به دیگر اعضای مجاور را داشته باشد. در این مطالعه تاثیر دال بتنی در عملکرد قاب خمشی فولادی در برابر خرابی پیشرونده در سازه بررسی‌شده است. در این تحقیق بخشی از سقف به همراه اعضای سازه‌ای و  اتصالات مدل‌سازی شده است و پارامترهای مؤثر دال بتنی در افزایش ظرفیت قاب خمشی فولادی و مسیر گسترش ترک در دال، ناشی از حذف ستون گوشه،کناری و میانی مورد ارزیابی قرارگرفته است. در مدل‌سازی، اثرات میلگرد، مقاومت بتن و ضخامت دال در افزایش مقاومت برای حالت‌های مختلف حذف ستون بررسی‌شده است. نتایج نشان می‌دهد قاب خمشی با دال کامپوزیت ظرفیت بالاتری نسبت به قاب خمشی بدون دال کامپوزیت در تحمل بارهای ناشی از حذف ستون دارا می‌باشد. همچنین میزان این افزایش مقاومت بستگی به موقعیت قرارگیری ستون در پلان دارد.}, keywords_fa = {خرابی پیشرونده,دال کامپوزیت,قاب خمشی فولادی,آنالیز اجزامحدود}, url = {https://adst.ihu.ac.ir/article_204252.html}, eprint = {https://adst.ihu.ac.ir/article_204252_a54282f080fce5f039979567423ca1ed.pdf} } @article { author = {Alizadeh Pahlavani, mohammad reza and Khosravi, Majid}, title = {Provide a practical approach in planning and placement of distributed generation sources based on multi-objective genetic algorithms}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {181-190}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Increasing rate of scattered productions in electrical energy resources has led to pay more attention in planning accuracy. For example, location, capacity and DG incorrect numbers, can increase the rate of losses and damages to the power grids. Diversity and contradiction in objective functions, the uncertainty of the usefulness or having problem with a proper procedure, are the issues that are discussed in new techniques for energy resources. In this paper, in order to increase the accuracy and processing speed, instead of the conventional single-objective algorithms such as genetic algorithm, particle swarm algorithm, ant colony algorithm and etc, a multi-objective optimization location and determination of DG capacities in the power systems has been discussed. The sample network with planning horizon for implementing and using non-dominant sorting genetic algorithm, has been modeled in Matpower toolbox in MATLAB. DG initial and operational planning costs with respect to the certain proposed time period has been considered. The results show that the proposed multi objective plan, lets us to apply various solutions. It also gives the independency from the grid and maximum yield by choosing less objective functions.}, keywords = {Distributed Generation,Non-dominated genetic algorithm,Multi objective functions,Optimization}, title_fa = {ارائه یک روش کاربردی در طرح ریزی و مکان یابی منابع تولید پراکنده بر مبنای الگوریتم ژنتیک چندهدفه}, abstract_fa = {افزایش سهم تولیدات پراکنده در منابع انرژی الکتریکی باعث شده است تا دقت در برنامه‌ریزی این منابع بیشتر مورد توجه قرار گیرد. به طور مثال مکان‌یابی، ظرفیت و تعداد نادرست DGها می‌تواند موجب افزایش تلفات و آسیب رسیدن به شبکه قدرت شود. گوناگونی و تناقض توابع هدف، عدم اطمینان از سودمندی و یا مشکل داشتن یک روش و مناسب بودن یا نبودن یک طرح برای رفع یک مورد خاص، مواردی است که در روش‌های نوین جهت بررسی منابع انرژی، مورد بحث قرار می‌گیرد. در این مقاله، به جهت افزایش دقت و سرعت، به جای استفاده از الگوریتم‌های مرسوم و  متداول تک هدفه همچون الگوریتم ژنتیک، الگوریتم اجتماع ذرات، الگوریتم کلونی مورچه و ... ، از یک برنامه چند هدفه جهت بهینه‌سازی، مکان‌یابی و تعیین ظرفیت DGها در سامانه قدرت بهره برده شده است. شبکه نمونه با افق طرح‌ریزی برای اجرا و با استفاده از الگوریتم ژنتیک با مرتب‌سازی نامغلوب و با بهره‌گیری از تولباکس Matpower در متلب مدل‌سازی شده است. هزینه اولیه و اجرایی DGها با توجه به یک دوره برنامه‌ریزی مشخص مورد بحث واقع شده است. نتایج نشان می‌دهد که طرح چند هدفه معرفی شده اجازه اعمال راه‌حل‌های گوناگونی را می‌دهد و بر مبنای انتخاب کمترین توابع هدف، بیشترین بازدهی و استقلال از شبکه را به ارمغان می‌آورد.}, keywords_fa = {تولید پراکنده,الگوریتم ژنتیک غیر مغلوب,توابع چند هدفه,بهینه سازی}, url = {https://adst.ihu.ac.ir/article_204253.html}, eprint = {https://adst.ihu.ac.ir/article_204253_723579c7fd4243ac1bb2ba459ba09ec6.pdf} } @article { author = {ghaffarpour, reza and velayati, mh}, title = {Determination of Candidate Lines Using Line Stability Indexes and Passive Defense Criterions Capability to Solving the Transmission Expansion Planning}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {191-200}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Proper design and operation of transmission lines, known as transmission expansion planning, is known as the only efficient tool for optimization and continuous transmission of electrical energy to neighbor countries, affording economic and security interests to Iran. In order to achieve this goal, different items such as maintaining power system stability after the development of lines, the adequacy of lines after the end of the year planning horizon, are important. Along with the operation of the transmission network constraints and economic objectives, one of the concerns of passive defence is the determination of appropriate candidates to apply it to solving the problem of transmission expansion planning. In this paper, using the line stability indexes such as FSVI and Lmn indexes which are based on the load flow analysis, relation between passive defence and the transmission expansion planning has been created. Using these criteria, candidate lines which are used as input in transmission expansion planning methods, are determined.}, keywords = {Line Stability Index,Network Security and,Transmission Expansion Planning,Passive Defense}, title_fa = {تعیین خطوط کاندید با استفاده از قابلیت شاخص‌های پایداری خطوط و معیارهای پدافند غیرعامل به منظور حل مسئله برنامه‌ریزی توسعه خطوط انتقال}, abstract_fa = {طراحی و بهره‌برداری صحیح از خطوط انتقال انرژی که تحت عنوان برنامه‌ریزی توسعه شبکه انتقال شناخته می‌شود، به عنوان تنها ابزار کارآمد به منظور انتقال بهینه و پیوسته انرژی الکتریکی به کشورهای همسایه شناخته شده است که منافع اقتصادی و امنیتی زیادی را نصیب کشور می‌کند. یکی از دغدغه‌های پدافند غیرعامل در کنار عواملی از قبیل پایداری سامانه قدرت و کفایت خطوط، تعیین خطوط کاندیدای مناسب جهت اعمال آن به روش‌های حل مسئله برنامه‌ریزی توسعه خطوط انتقال است. بدین منظور، در این مقاله با استفاده از شاخص‌های پایداری خطوط شامل شاخص‌های FSVI و Lmn که مبتنی بر معادلات پخش‌بار هستند، ارتباطی میان پدافند غیرعامل و مسئله برنامه‌ریزی توسعه خطوط انتقال ایجاد کرده تا با استفاده از آن امنیت و کفایت خطوط انتقال در توابع هدفی که به منظور حل مسئله مذکور مورد استفاده قرار می‌گیرند، لحاظ گردد. با استفاده از این شاخص‌ها، خطوط کاندیدا که به عنوان ورودی‌ در روش‌های حل مسئله مذکور مورد استفاده قرار می‌گیرند، تعیین می‌شوند.}, keywords_fa = {شاخص پایداری خط,کفایت و امنیت شبکه انتقال,برنامه‌ریزی توسعه خطوط,پدافند غیر عامل}, url = {https://adst.ihu.ac.ir/article_204254.html}, eprint = {https://adst.ihu.ac.ir/article_204254_8846085d4e49dc7edfd4856668bd737b.pdf} } @article { author = {رحمتی, کبری and نادری, حسن and کشوری, سامان}, title = {Content-Structural Graph Clustering and a New Measure for Its Evaluation}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {201-210}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Today, with the spread of social networks, the opposition's efforts to chill out people from government (known as “soft war”) are increased. Therefore, dealing with this type of networks is important for military and security organizations. Graph clustering is one of the first attempts toward analyzing social networks which can appropriately be modeled by a content graph. In contrast, most of the existing graph clustering methods independently focused on one of the content or structural aspects of a graph. The aim of this paper (implemented as CS-Cluster algorithm) is to achieve well connected clusters while their nodes benefits from homogeneous attribute values (content). In the second step of our research, after an intensive search, no measure has found which could simultaneously consider content and structural features of clustering algorithms. So to be able to appropriately evaluate our algorithm, a new content-structural measure (so-called “CS-Measure”) is proposed. Our experimentation shows that the proposed clustering algorithm outperforms two other well-known content-structural clustering algorithms, using the new content-structural, average similarity, and Error link measure as well as the previous content and structural measures, And it also performed relatively well in density measure.}, keywords = {Clustering,content graph,content-structural clustering,content-structural evaluation}, title_fa = {خوشه‌بندی محتوایی-ساختاری گراف و معیاری جدید جهت ارزیابی آن}, abstract_fa = {امروزه با گسترش شبکه‌های اجتماعی در بین مردم، تلاش‌های مخالفین برای بدبین کردن ایشان نسبت به حکومت که از آن به عنوان جنگ نرم یاد می‌شود افزایش یافته است، بنابراین توجه به این شبکه‌ها برای ارگان‌های نظامی و امنیتی بیش از پیش اهمیت دارد. خوشه‌بندی گراف از جمله اولین کارهای تحلیلی یک یا چند شبکه اجتماعی است. متأسفانه اکثر خوشه‌بندی‌های گرافی انجام شده بر روی جنبه‌های ساختاری یا محتوایی گره‌های گراف به صورت مستقل تأکید دارند. هدف از این مقاله (پیاده‌سازی شده در قالب الگوریتمCS-Cluster ) رسیدن به خوشه‌هایی با ساختار درونی منسجم و مقادیر ویژگی (محتوایی) همگن در گراف است. از طرفی پس از جستجوهای صورت گرفته در این تحقیق، هیچگونه معیاری جهت ارزیابی الگوریتم‌های خوشه‌بندی که جنبه‌های ساختاری و محتوایی گره‌ها را به صورت هم‌زمان در نظر بگیرد، یافت نشد. به همین دلیل در دومین گام معیاری جدید به نام CS-Measure ارائه شد که قادر است الگوریتم‌های خوشه‌بندی گراف را از هر دو جنبه ساختار و محتوا به صورت هم‌زمان مورد سنجش قرار دهد. مقایسه الگوریتم مطرح شده با دو الگوریتم خوشه‌بندی ساختاری-محتوایی (از سه الگوریتم شناخته شده تاکنون) بر اساس معیارهای میانگین شباهت، خطای یال و معیارِ جدیدِ ساختاری-محتوایی، بیانگر عملکرد بهتر روش ارائه شده است و از نظر معیار تراکم نیز عملکرد نسبتاً خوبی دارد.}, keywords_fa = {خوشه‌بندی,گراف محتوایی,خوشه‌بندی ساختاری-محتوایی,ارزیابی ساختاری-محتوایی}, url = {https://adst.ihu.ac.ir/article_204255.html}, eprint = {https://adst.ihu.ac.ir/article_204255_100418bb439b0d8b02fc6fd515c35106.pdf} } @article { author = {Mohammadi, Reza and Parsaei, Mohammad Reza and Javidan, Reza and Akbari, Reza}, title = {An Effective Countermeasure Method against Freeloading Attack in Software Defined Networks}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {211-219}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In recent years, Software Defined Networking (SDN) facilitates the most of management and configuration issues for network administrators. In SDN, data plane and control plane are separated from each other and the control plane is responsible for all management functionality issues. Although, this mechanism provides effective and centralized management, it introduces some security problems which might have adversary effect on the performance of network. Freeloading is one of the most important attacks in SDN, in which a malicious user can hiddenly use the network resources. This paper explains the freeloading attack in detail and proposes an effective countermeasure for mitigating the attack. Due to the some components of the proposed method is implemented in data plane; it has low overhead and high accuracy. Simulation results confirm that the proposed method can detect and prevent the freeloading attack effectively without adverse effects on the network performance.}, keywords = {Software Defined Networks,freeloading attack,network security}, title_fa = {یک روش کارآمد جهت مقابله با حمله بارکشی رایگان درشبکه های مبتنی بر نرم افزار}, abstract_fa = {ظهور شبکه‌های مبتنی بر نرم‌افزار در طی سالیان اخیر، بسیاری از مباحث مرتبط با مسائل مدیریتی و پیکربندی شبکه را برای مدیران شبکه تسهیل کرده است. در شبکه‌های مبتنی بر نرم‌افزار سطح داده‌ای و سطح کنترلی شبکه به منظور مدیریت متمرکز و پویا از یکدیگر منفک شده‌اند. تمامی امور مرتبط با اعمال سیاست‌های مدیریتی و راهبری شبکه در شبکه‌های مبتنی بر نرم‌افزار در سطح کنترلی انجام می‌شود. با وجود این که این سازوکار امکان مدیریت متمرکز و کارآمد را فراهم می‌کند، برخی نقاط ضعف امنیتی جدیدی را مطرح می‌کند که می‌توانند تأثیر مخربی بر روی عملکرد و کارایی شبکه داشته باشند. یکی از مهم‌ترین حمله‌های موجود در شبکه‌های مبتنی بر نرم‌افزار، حمله بارکشی رایگان می‌باشد که در آن یک کاربر بدخواه می‌تواند از منابع تخصیص داده شده به یک کاربر دیگر به نحوی استفاده کند که سطح کنترلی شبکه متوجه این موضوع نشود. این مقاله، ابتدا به تشریح و معرفی کامل حمله بارکشی رایگان می‌پردازد و در ادامه یک روش مقابله کارآمد جهت پیشگیری از این حمله ارائه می‌دهد. به علت این که بخشی از روش پیشنهادی در سطح داده‌ای شبکه پیاده‌سازی می‌شود، دارای سرعت تشخیص بالا بوده و سربار کمی دارد. نتایج حاصل از شبیه‌سازی نشان می‌دهد که روش پیشنهادی بدون اثرگذاری منفی بر کارایی شبکه، به طور مؤثری می‌تواند حملات بارکشی رایگان را شناسایی و متوقف نماید.}, keywords_fa = {شبکه های مبتنی بر نرم افزار,حمله بارکشی رایگان,امنیت شبکه}, url = {https://adst.ihu.ac.ir/article_204256.html}, eprint = {https://adst.ihu.ac.ir/article_204256_acf4b16c40c405e7dd538549707c1add.pdf} } @article { author = {Abbasi Arand, Bijan and Zahedi, Amir}, title = {Phase Error Correction of Large Phased Array Antennas using Genetic Algorithm}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {221-229}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {Each channel of the phased array antenna intrinsically has the phase errors. This is because of the position and orientation error of antenna elements due to assembling tolerance or mechanical distortion, and the electric length error of each RF channel. These errors can decrease the antenna performance, for instance the gain reduction, sidelobe level enhancement, and inaccurate beam direction. In order to improve the performance of the antenna in the presence of phase errors, a phase correction method using Genetic Algorithm (GA) is proposed. By using the proposed method, the antenna overall radiation pattern is recovered close to ideal radiation pattern without error. By applying the simulation data to a large array of 32 40 elements at the frequency of S-band the effectiveness of the proposed method is verified.}, keywords = {Antenna,genetic algorithm,Phased Array,Radiating Element}, title_fa = {تصحیح خطای فاز آنتن‌های آرایه فازی بزرگ با استفاده از الگوریتم‌ ژنتیک}, abstract_fa = {تمامی آنتن‌های آرایه فازی دارای یک خطای فاز نسبی ناشی از تفاوت مسیر بین هر کانال هستند. همچنین خطای موقعیت در المان‌های تشعشعی آرایه به دلیل فرایندهای ساخت و مونتاژ به وجود می‌آید. این خطاها به صورت خطاهای فاز قیاسی برای هر کانال المان‌های آرایه محسوب شده و بنابراین باعث کاهش بهره آنتن، افزایش سطوح لوب فرعی و انحراف در راستای پرتو می‌شوند. در این مقاله به جهت بهبود عملکرد آنتن در حضور خطاهای فاز، روشی برای تصحیح خطای فاز آنتن‌های آرایه فازی با استفاده از الگوریتم­ ژنتیک ارائه شده است. با استفاده از این روش، الگوی تشعشعی آنتن به طور مطلوبی به الگوی ایده­آل در حالت بدون خطا، بازگردانده می‌شود. با اعمال داده­های   شبیه­سازی به یک آرایه­ بزرگ با 40 32 المان در باند فرکانسی S و اندازه­گیری الگوی تشعشعی آنتن، صحت داده­های شبیه­سازی و خروجی روش ارائه شده تأیید می­شود.}, keywords_fa = {آرایه فازی,آنتن,الگوریتم ژنتیک,المان تشعشعی}, url = {https://adst.ihu.ac.ir/article_204257.html}, eprint = {https://adst.ihu.ac.ir/article_204257_fcc51a56f767f29815cd598976c16135.pdf} } @article { author = {سازدار, امیرمهدی and مظلوم, جلیل}, title = {Improvement of Buildings Detection Based on Adaptive Thresholding in Satellite Images}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {231-242}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {In this paper, a combined method to detect buildings from satellite imagery is presented. This method is based on combining data obtained by the local feature vectors and decision-making by applying adaptive thresholding the estimated probability distribution function, is conducted. Local Features serve as observations and location of buildings are used as joint random variables in order to estimate the probability density function. Then the locations of buildings are determined by considering modes of estimated probability density function and extracted features. To evaluate the efficiency of proposed method some satellite imagery of northern Tehran is used. Satellites North of Tehran building images are used in order to evaluate our proposed method. Tested images have different spatial contrast and resolution. Furthermore, tested buildings contain variety of characteristics which allows us representing our simulation with sufficient diversity. Experimental results of 32 different images in Tehran have shown that proposed method can be detected existing buildings in satellite imagery with fewer errors and more accurately.}, keywords = {Satellite Images,Building Detection,Feature Extraction,probability density function,random variables}, title_fa = {بهبود تشخیص ساختمان‌ها در تصاویر ماهواره‌ای بر اساس آستانه گذاری تطبیقی}, abstract_fa = {در این مقاله، روشی ترکیبی به منظور تشخیص ساختمان‌ها، از روی تصاویر ماهواره‌ای ارائه شده است. این روش بر مبنای ترکیب داده‌های حاصل شده از بردارهای ویژگی محلی و تصمیم‌گیری با اعمال آستانه‌گذاری تطبیقی روی تابع چگالی احتمال تخمین زده شده، انجام گرفته است. ویژگی‌ها به عنوان مشاهدات و محل ساختمان‌ها به عنوان متغیر تصادفی توأم به منظور تخمین تابع توزیع احتمال در نظر گرفته می‌شوند. سپس با توجه به مدهای تابع توزیع احتمال و همچنین ویژگی‌های استخراج شده، مکان ساختمان مشخص می‌گردد. به منظور ارزیابی کارایی روش معرفی شده، از برخی تصاویر ماهواره‌ای شمال شهر تهران استفاده شده است. تصاویر مورد آزمایش دارای وضوح و تباین‌های مختلفی هستند. همچنین، ساختمان‌ها در این تصاویر مشخصه‌های متفاوت و مختلفی دارند، بنابراین می‌توان رویکرد ارائه شده را روی مجموعه اطلاعات واگرا آزمایش شود. نتایج به‌دست آمده روی 32 تصویر مختلف از شهر تهران، بیانگر این است که روش پیشنهادی می‌تواند ساختمان‌های موجود در تصاویر ماهواره‌ای را با خطای کمتر و دقت بیشتری تشخیص دهد.}, keywords_fa = {تصاویر ماهواره‌ای,تشخیص ساختمان,استخراج ویژگی,تابع توزیع احتمال,متغیرهای تصادفی}, url = {https://adst.ihu.ac.ir/article_204258.html}, eprint = {https://adst.ihu.ac.ir/article_204258_8b4f51bce63d6f0bdb3e2adc6b80861d.pdf} } @article { author = {malakzadeh, abdollah and mansorsamaei, mohsen and Nouri Jouybari, Soodabeh}, title = {Simulation of Phase Correlation Technique in Brillouin Dynamic Grating Sensors to Achieve Spatial Resolution in the Millimeter Range}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {243-250}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {The high sensitivity and precision of the distribution optical fiber newfound sensors led to special attention to them and use them in the modern industry, and in particular applications such as monitoring of borders security and leakage of energy pipes, monitoring the safety of large urban structures, Railway lines and so on. The spatial resolution and sensing length are two basic characteristic parameters for researchers. It is obvious that in the military and industrial affairs, whatever the spatial resolution is better will be observed more safety and less damages. The highest obtained spatial resolution between the Brillouin scattering sensors is corresponds to Brillouin dynamic grating sensors which is less than 1 cm. In this sensors, grating was generated by two pump waves and was read by probe wave that senses the intruder. This spatial resolution is achieved using phase correlation technique. In this technique pump waves are modulated by a phase modulator PRBS that generated a periodic and random phase shift equal to 0 or π. Of course, the heavy signal processing and complicated mathematical equations are disadvantages of this technique. In this article, we simulate phase correlation technique using a straightforward matrix relations and calculated first, spatial resolution and then sensing length. finally, with this innovative technique is obtained 9 mm spatial resolution over a  295 m of sensing length and 14 mm spatial resolution over a 460 m of sensing length that is full matching with the results of phase correlation tecnique without having its complexities.}, keywords = {Brillouin Dynamic Grating Sensor,Distributed Fiber Sensors,Phase Correlation Technique,Matrix Simulation of Phase Correlation}, title_fa = {شبیه‌سازی روش همبستگی فازی در حسگرهای توری دینامیکی بریلوئن برای رسیدن به قدرت تفکیک فضایی در حد میلی‌متر}, abstract_fa = {حساسیت و دقت فوق العاده­ی حسگرهای نوظهور فیبر نوری توزیعی سبب توجه ویژه به آن­ها و استفاده روز افزون از آن‌ها در صنایع نوین و بخصوص کاربردهایی نظیر پایش امنیت مرزها و نشت لوله­های انرژی، نظارت ایمنی سازه­های عظیم شهری، خطوط راه آهن و .. شده است. قدرت تفکیک فضایی و طول اندازه‌گیری، دو پارامتری هستند که همواره مورد توجه محققان در این زمینه بوده است. آشکار است که در امور نظامی و عمرانی هر چه دقت فضایی بهتر باشد ایمنی بیشتر و خسارات کمتری مشاهده خواهد شد. بهترین دقت فضایی در این نوع حسگرها، در حسگرهای توری دینامیکی بریلوئن ثبت شده است که کمتر از 1سانتی‌متر می‌باشد. در این حسگرها از دو موج پمپ برای ساختن توری و یک موج گمانه برای مشاهده تغییرات آن استفاده می‌شود. چنین دقتی با استفاده از روش همبستگی فازی به‌دست آمده است که در آن امواج پمپ به کمک یک مدولاتور فازی PRBS که بر روی این امواج اختلاف فاز صفر و π به صورت تصادفی و البته دوره‌ای اعمال می‌کند، مدوله می‌شوند. البته از معایب این روش، پردازش سیگنال‌های سنگین و روابط ریاضی پیچیده حاکم بر آن است که درک این روش را بسیار سخت کرده است. در این مقاله به کمک روابط سر‌راست و قابل فهم ماتریسی، روش همبستگی فازی شبیه‎‌سازی شده و ابتدا دقت فضایی و سپس طول اندازه‌گیری محاسبه شده است. درنهایت با این روش ابداعی، دقت فضایی 9 میلی‌متر برای طول اندازه‌گیری 295 متر و دقت فضایی 14 میلی‌متر برای طول اندازه‌گیری 460 متر به‌دست آمده که کاملاً مطابق با نتایج حاصل از روش همبستگی فازی است بدون این­که پیچیدگی‌های این روش را داشته باشد.}, keywords_fa = {حسگر توری دینامیکی بریلوئن,حسگرهای توزیعی فیبر نوری,روش همبستگی فازی,شبیه‌سازی ماتریسی همبستگی فازی}, url = {https://adst.ihu.ac.ir/article_204259.html}, eprint = {https://adst.ihu.ac.ir/article_204259_094768dee7822b4dbd67f2b03af37eb2.pdf} } @article { author = {صادقی, حسین}, title = {Design, Simulation and Fabrication of Photo-Betavoltaic Semiconductor Battery}, journal = {Journal of Advanced Defense Science & Technology}, volume = {9}, number = {2}, pages = {251-257}, year = {2018}, publisher = {Imam Hussein University}, issn = {2676-2935}, eissn = {2980-8022}, doi = {}, abstract = {There are many methods for converting the beta particle energy to electrical energy. Conversion of the beta particle energy to the electrical energy using semiconductors, is one of the important methods that can be used in radioisotopic batteries. In this work, a photo-betavoltaic semiconductor battery has been designed and constructed. The battery produce electric energy by converting photon energy from the sun or kinetic energy of beta particles. Doping process of silicon to fabrication of the p-i-n diode has been investigated. Thus, diffusion of dopants in 1000°C, SEM analysis, calculation of doping concentration, calculation of the diffusion depth and electric resistance of the doped silicon have been investigated. The measured betavoltaic current was 50 pA for a 58 μCi 90Sr/90Y. The photo-betavoltaic battery has been simulated by Monte-Carlo MCNP5 code and 45.2 pA electric current has been obtained. A fairly good agreement was observed between experimental and numerical results. Also, this battery is responds to visible light, sensitivity of which is comparable with the sun cells.}, keywords = {Beta particles,Photo-betavoltaic battery,Doping of semiconductor,Radioisotope,Simulation}, title_fa = {طراحی، شبیه‌سازی و ساخت یک نمونه آزمایشگاهی باتری نیمه‌‌هادی فوتو-بتاولتائیک}, abstract_fa = {روش‌های متعددی برای تبدیل انرژی ذرات واپاشی بتا به انرژی الکتریکی وجود دارد. تبدیل انرژی ذرات بتا به انرژی الکتریکی با استفاده از قطعات نیمه‌هادی، یکی از روش‌های مهم تبدیل انرژی واپاشی است که در باتری‌های رادیوایزوتوپی به‌کار برده می‌شود. در این تحقیق، یک باتری نیمه‌هادی فوتو-بتاولتائیک طراحی و ساخته شده است. این باتری ساخته شده، انرژی خورشیدی و انرژی پرتوهای بتا را به انرژی الکتریکی تبدیل می‌کند. فرآیند آلایش سیلیکون برای ساخت دیود p-i-n بررسی و انجام شده که شامل نفوذ آلاینده‌ها در دمای C°1000، آنالیز SEM، محاسبه میزان آلایش، محاسبه عمق نفوذ و بررسی مقاومت الکتریکی سطح سیلیکون آلاییده شده است. در حضور پرتوهای بتای گسیلی از چشمه 90Sr/90Y (μCi 58)، جریان بتاولتائیک اندازه‌گیری شده برابر با pA 50 گردید. باتری مورد استفاده در آزمایشگاه، با کد مونت‌کارلو MCNP5 شبیه‌سازی شد و جریان الکتریکی pA 2/45 به‌دست آمد. نتایج شبیه‌سازی و تجربی توافق بسیار خوبی دارند. همچنین این باتری ساخته شده به نور مرئی هم پاسخ می‌دهد و حساسیت آن قابل قیاس با سلول‌های نوری است.}, keywords_fa = {ذرات بتا,باتری فوتو-بتاولتائیک,آلایش نیمه‌هادی,رادیوایزوتوپ,شبیه‌سازی}, url = {https://adst.ihu.ac.ir/article_204260.html}, eprint = {https://adst.ihu.ac.ir/article_204260_1547cf7646103cadba7639301d5ce3fb.pdf} }